KIT-GASKET-RS 2572753 - Caterpillar

1. Remove the floor plate. Disconnect oil line (1) from the transmission oil filter housing. Remove four bolts (2) to disconnect manifold (3) from the transmission oil filter housing. 2. Remove four bolts (5) that hold the transmission oil filter housing to the transmission. Remove transmission oil filter housing (4). The following steps are to install the transmission oil filter.3. Put transmission oil filter housing (4) in position on the transmission and install four bolts (5).4. Connect oil lines (1) to the transmission oil filter housing. Install manifold (3) to the transmission oil filter housing with bolts (2). Install the floor plate.Disassemble And Assemble Transmission Oil Filter (3F/3R Power Shift)
Start By:a. remove transmission oil filter If only the filter bypass valve is to be removed, remove plug (2) from the cover. Remove spring (5) and valve spool (6) from the housing.1. Drain the oil from the oil filter housing. 2. Remove bolts (1) that hold cover (3) to the housing. Remove cover (3) and the oil filter element from the housing.3. Remove the oil filter element and the O-ring seal for the oil filter element from the cover. 4. Remove O-ring seals (4) from the housing.5. Remove spring (5) and valve spool (6) for the filter bypass valve from the housing. The following steps are for assembly of the transmission oil filter.6. Make sure all of the parts of the transmission oil filter are clean. Inspect the O-ring seals for damage and make replacements if needed. Put clean oil on the parts.7. Install O-ring seals (4) in the housing.8. Install valve spool (6) and spring (5) for the filter bypass valve in the housing.9. Install the O-ring seal and filter element on cover (3).10. Install cover (3) on the housing.End By:a. install transmission oil filter