KIT-SEAL 2588411 - Caterpillar

Table 1
Tools Needed     Qty    
4C-6500 Digital Thermometer     1    High inlet manifold air temperature will reduce the power output of the engine. High inlet manifold air temperature will also cause detonation.The inlet manifold air temperature can be measured from more than one location.
Illustration 1 g00819950
Plug near the front of the cylinder head
Illustration 2 g00819936
Plugs on the aftercooler (1) Plug (2) PlugNote: There will be a difference in the temperature that is measured at plug (1) and plug (2). This is because of the reduction of the air temperature through the aftercooler.To measure the inlet manifold air temperature, use the 4C-6500 Digital Thermometer. Remove a plug near the front of the cylinder head or from the aftercooler. Insert a temperature probe in place of the plug. Measure the temperature when the engine is operating at full load.Table 2 lists the maximum inlet manifold air temperatures. The temperatures are associated with different water temperature regulators for separate circuit aftercoolers.
Table 2
Maximum Inlet Manifold Air Temperature for G3400 Engines    
Water Temperature Regulator     Maximum Inlet Manifold Air Temperature    
32 °C (90 °F) (1)    
43 °C (110 °F)    
54 °C (130 °F) (1)    
65 °C (150 °F)    
( 1 ) Water inlet to the aftercooler