KIT-REPAIR 2637140 - Caterpillar

Caterpillar Products AllIntroduction
Important Safety Information
Illustration 1 g02139237
Think Safety
European Union Compliant, CE markedMost accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person must also have the necessary training, skills, and tools to perform these functions properly.Improper operation, lubrication, maintenance, or repair of this product can be dangerous and could result in injury or death.Do not operate or perform lubrication, maintenance, or repair on this product until you have read and understood the operation, lubrication, maintenance, and repair information.Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons.The hazards are identified by a “Safety Alert Symbol” followed by a “Signal Word” such as “DANGER”,“” or “CAUTION”. The Safety Alert “” label is shown below.A non-exhaustive list of operations that can cause product damage are identified by "" labels on the product and in this publication.Literature Information
Store this manual with the tool group.This manual contains safety information, operation instructions, and maintenance information and should be stored with the tool group.Some photographs or illustrations in this publication may show details that can be different from your service tool. Guards and covers might have been removed for illustrative purposes.Continuing improvement and advancement of product design might have caused changes to your service tool, which are not included in this publication.Whenever a question arises regarding your service tool or this publication, consult Dealer Service Tools (DST) for the latest available information.The Safety Section lists basic safety precautions.Read and understand the basic precautions listed in the Safety Section before operating or performing maintenance and repair on this service tool.General Information Section
The General Information Section describes tooling functions and features. This section provides useful information on individual parts, extra tooling, and resources.Operation Section
The Operation Section is a reference for the new operator and a refresher for the experienced operator.Photographs and illustrations guide the operator through correct procedures for using the tool group.Operating techniques outlined in this publication are basic. Skill and techniques develop as the operator gains knowledge of the service tool and the tools capabilities.Service Parts Section
The Service Parts Section describes tooling replacement parts and part number availability.General Information Section
Introduction
These voltmeter leads were manufactured by two different suppliers. The older leads are yellow and are manufactured by TesLite. The newer leads are red and manufactured by LoadPro. The two manufacturers use different load resistors therefore the tables have different values. The part number for each manufacturer is the same (275-9936).Using the TesLite Voltmeter Leads with your Digital Voltmeter
Note: This is not a special tool. This is a set of normal Voltmeter leads that have a special function of locating corrosion in wiring. Remove your normal voltmeter leads and install these. The TesLite Voltmeter Leads work with any digital voltmeter