KIT-HARNESS REPAIR 2746200 - Caterpillar

Spin-on Oil Filter
Illustration 1 g01277377
Table 1
Callout Quantity Part Specification Description
1 - Seal Lubricate the top of the seal with clean engine oil before installation.
- - Filter Type Full flow
- - Bypass valve Pressure to open engine oil filter bypass valve 80 to 120 kPa (12 to 18 psi) Replaceable Element
Illustration 2 g01277379Note: Lubricate the seal on the oil filter housing with clean engine oil before installation.
Table 2
Callout Quantity Part Specification Description
- - Filter type Full flow
2 - Oil filter housing Tighten the oil filter housing to the oil filter base to the following torque. 25 N m (18 lb ft)
3 - - Recess for 1/2 inch square drive
4 - Drain plug Tighten the drain plug on the oil filter housing to the following torque. 12 N m (9 lb ft)
- - Bypass valve Pressure to open engine oil filter bypass valve 130 to 170 kPa (19 to 25 psi) Note: The horizontal filter has a drain plug in the filter head