KIT-FLOW CONTROL VALVE 2748878 - Caterpillar

Set: C18 (S/N: CYN1-UP; GEN1-UP) C32 (S/N: RNE1-UP; RNX1-UP)Marine Engine: 3406E (S/N: 9WR1-UP) 3412E (S/N: 9KS1-UP) C15 (S/N: RLA1-UP) C18 (S/N: WKB1-UP; PLE1-UP; CKH1-UP; C1J1-UP; JKX1-UP; J2K1-UP; T2P1-UP) C30 (S/N: CLX1-UP) C32 (S/N: RXB1-UP; RNC1-UP; RND1-UP; RNR1-UP; SLT1-UP; T3T1-UP; RNY1-UP; RNZ1-UP)Introduction
Do not perform the procedure that is outlined in this Special Instruction until the entire instruction has been read and understood.Installation Procedure
Ensure that the clamps are installed in the correct orientation. Refer to Illustration 1 and Illustration 2 for the correct pump configuration and clamp orientation.
Illustration 1 g02216433
Pump example one (1) Clamps
Illustration 2 g02216434
Pump example two (1) Clamps
Tighten the bolts evenly to a torque of 10 N m (88.5 lb in).Note: Tightening the bolts evenly will ensure an even clamp force across the mating flanges with putting stress on the clamps.