2788738 KIT-PISTON Caterpillar parts
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, AP-1055D, AP-...
Rating:
Alternative (cross code) number:
CA2788738
278-8738
2788738
CA2788738
278-8738
2788738
Weight: 4 pounds 2 kg.
ASPHALT PAVER, VIBRATORY COMPACTOR,
Compatible equipment models: 2788738:
Number on catalog scheme:
For full view, you need register
Information:
Bucket Kickout Position
Illustration 1 g00539942
Position the bottom of the bucket parallel to the ground.
Stop the engine and remove the key.
Loosen four bolts (1) that secure the clamp to tube (2).
Move the tube and the switch down the cylinder in order to increase the bucket digging angle. Move the tube and the switch up the cylinder in order to decrease the bucket digging angle.
Tighten four bolts (1).
Start the engine and raise the bucket. Move the tilt control lever to the TILT BACK position. When the preset digging angle is reached, the tilt control lever will return to the HOLD position.Lift Kickout Height
Illustration 2 g00731883Note: The cover has been removed in order to gain better access to the kickout set switch.
Start the engine and raise the bucket to the desired height.
Stop the engine and remove the key.
Loosen the bolts on magnet (3). Move the magnet in bracket (4) until the magnet is aligned with switch (5).
Move magnet (3) in bracket (4) in the direction of the arrow in order to raise the lift kickout height. Move magnet (3) in bracket (4) in the opposite direction of the arrow in order to lower the lift kickout height.
Tighten the bolts on magnet (3).
Start the engine and raise the bucket. The lift control lever will return to the HOLD position when the desired lift kickout height is reached.
Illustration 1 g00539942
Position the bottom of the bucket parallel to the ground.
Stop the engine and remove the key.
Loosen four bolts (1) that secure the clamp to tube (2).
Move the tube and the switch down the cylinder in order to increase the bucket digging angle. Move the tube and the switch up the cylinder in order to decrease the bucket digging angle.
Tighten four bolts (1).
Start the engine and raise the bucket. Move the tilt control lever to the TILT BACK position. When the preset digging angle is reached, the tilt control lever will return to the HOLD position.Lift Kickout Height
Illustration 2 g00731883Note: The cover has been removed in order to gain better access to the kickout set switch.
Start the engine and raise the bucket to the desired height.
Stop the engine and remove the key.
Loosen the bolts on magnet (3). Move the magnet in bracket (4) until the magnet is aligned with switch (5).
Move magnet (3) in bracket (4) in the direction of the arrow in order to raise the lift kickout height. Move magnet (3) in bracket (4) in the opposite direction of the arrow in order to lower the lift kickout height.
Tighten the bolts on magnet (3).
Start the engine and raise the bucket. The lift control lever will return to the HOLD position when the desired lift kickout height is reached.
Cat SIS web machinery list:
Parts kit Caterpillar catalog:
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 2290, 2390, 2391, 2470C, 2491, 24M, 257...
216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3, AP-1055D, BG-2455D, BG-260D, CB-434D, CB-534D, CB-54, CB-564D, CB-64, CD-54, D8R
120M 2, 2384C, 2484C, 2570C, 2670C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 3...
3126E, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L,...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L,...
120M, 12M, 2470C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, C7.1, CP-56, CP-64, CP-76, CS-56, CS-56B,...
120M, 12M, 2470C, 329E, 329E LN, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-74, CS-74B, CS-78B, D5R LG...
120M, 12M, 2470C, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-68B, CS-74, CS-74B, CS-78B, D5R LGP, D6K,...
902, 906, 908, AP-1055D, AP-655C, BG-2455D, BG-260D, CB-434D, CB-534D, CB-564D, CB-634D, D6E
1090, 1190, 1190T, 1290T, 12M 2, 1390, 140M, 160M, 2290, 2390, 2391, 2491, 2590, 320B FM LL, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 3...
3417637
KIT-BEARING
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, AP-1055D, AP-...
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, AP-1055D, AP-...
2788745
KIT-RELIEF VALVE
236D, 242D, 246C, 256C, 257D, 259D, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, AP-1055D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, B...
236D, 242D, 246C, 256C, 257D, 259D, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, AP-1055D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, B...
2788731
KIT-DRIVE MOTOR
257B3, 259B3, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
257B3, 259B3, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
2788727
KIT-SWASHPLATE
277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
2788725
KIT-DUO-CONE SEAL
257B3, 259B3, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
257B3, 259B3, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
2788724
KIT-GEAR
259B3, 259D, 277C, 277C2, 287C, 287C2, 297C
259B3, 259D, 277C, 277C2, 287C, 287C2, 297C
246C, 256C, 262C, 272C, 277C, 279C, 287C, 289C, 297C, 299C
242B3, 242D, 246C, 252B, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C
3458005
KIT-SEAL
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
2788744
KIT-SOLENOID
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, CB-44B, CB-54...
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, CB-44B, CB-54...
2788742
KIT-BEARING
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, AP-1055D, AP-...
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, AP-1055D, AP-...
2788736
KIT-SEAL
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, CB-44B, CB-54...
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, CB-44B, CB-54...