KIT-SWASHPLATE 2804458 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-7611     Tube     2    
8S-7615 Pin     2    
8S-7640 Stand     2    
B     183-4797     Track Roller Lifting Fork     1    
Start the engine. Park the machine on a hard, level surface. Stop the engine.
Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" to release the tension and to tighten the tension of the track.
Illustration 1 g02157981
Note: Adjust the height of Tooling (A) in order to have sufficient clearance for the removal of the track rollers.
Lift the side of the machine. Install Tooling (A) under the undercarriage, as shown.
Illustration 2 g02157984
Loosen bolts (1) that hold track guide (2) to the undercarriage.Note: Do not remove the bolts at this time.
Position Tooling (B) and a suitable lifting device under track guide (2). The weight of track guide (2) is approximately 29 kg (65 lb). Remove bolts (1) and track guide (2) .
Illustration 3 g02157985
Loosen bolts (4) that secure track roller (3) to the undercarriage.Note: Do not remove bolts (4) at this time.
Position Tooling (B) and a suitable lifting device under track roller (3). The weight of track roller (3) is approximately 45 kg (100 lb). Remove bolts (4) and track roller (3) .Installation Procedure
Install track roller (3) in the reverse order of removal.Note: Make sure the fill/drain plugs in track rollers (3) are facing toward the outside of the undercarriage.
Make sure the mounting surface of track rollers (3) are clean and free of debris.