KIT-BEARING 2807838 - Caterpillar

Display Modules
Illustration 1 g00645203
Illustration 2 g00645225Both monitoring systems consist of action lamp (1), gauge cluster module (2), speedometer/tachometer module (3), message center module (4), keypad (5), and an action alarm.
Illustration 3 g00647016Gauge cluster module (2) consists of four gauges that monitor the following machine conditions: coolant temperature (6), transmission oil temperature (7), hydraulic oil temperature (8) and fuel level (9)
Illustration 4 g00647019Speedometer/tachometer module (3) consists of analog gauge (10) that shows the engine rpm and a digital readout that shows machine ground speed (11) and current transmission gear (12).
Illustration 5 g00645234Message center module (4) consists of alert indicator (13), universal gauge (14), and message center display (15).Keypad
Illustration 6 g00645225Keypad (5) is used for entering information into the monitoring system.
Illustration 7 g00648329"OK" key (16) - This key is used for completing an entry and for acknowledging all events. With the VIMS, this key can also be used to back up to the previous menu in the Payload Control System (PCS).Right arrow key (17) and left arrow key (18) - These keys allow the operator to scroll forward or backward through the available parameters. With the VIMS, the left arrow key can also be used to erase the last character that was entered with the keypad."GAUGE" key (19) - This key changes the message center module to an analog gauge. Refer to Operation and Maintenance Manual, "Parameters (VIDS and VIMS Monitoring System)" for more information about viewing parameters."ID" key (20) - This key is used to enter the ID number of the operator."F1/Menu" key (21) - This key is used to display service codes (MID, CID, and FMI) when the message center shows a system event. Also, this key is used to display the actual value of a machine event such as the brake oil temperature. With the VIMS, this key can also be used to access the main menu for the Payload Control System (PCS)."F2/Clear" key (22) - This key clears the current entry."F3/Delay" key (23) - This key is used only with the VIMS to enter the delay code for the Payload Control System (PCS).