KIT-TORQUE CONVERTER GASKET 2826653 - Caterpillar

Removal Procedure
Start By:
Remove the fuel injection lines, if necessary. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Disconnect batteries before performance of any service work.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00587937
Remove nuts (1) and the washers from the terminal on the glow plugs.
Remove bus bar (2) from the glow plugs.
Illustration 2 g00588004
Remove glow plugs (3) from the cylinder head.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00588004
Install glow plugs (3) in the cylinder head. Tighten the glow plugs to a torque of 17 N m (13 lb ft).
Illustration 4 g00587937
Install bus bar (2) on the glow plugs.
Install the washers and nuts (1) on the glow plugs. Tighten the nuts (1) to a torque of 17 N m (13 lb ft).End By: Install the fuel injection lines, if necessary. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".