2829625 KIT-GASKET-WLG Caterpillar parts
Rating:
Alternative (cross code) number:
CA2829625
282-9625
2829625
CA2829625
282-9625
2829625
Weight: 0.62 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$224.05
06 Jun 2021
1.0[0.45] Pounds
US: Highway And Hea
2829625 | Caterpillar Gasket Set, Water Lines Group
HHP HIGHWAY & HEAVY PARTS HHP provides parts equal or better in quality compared to the OE at a fraction of the cost. || Products are crafted with hard-wearing materials for long-lasting strength and durability. || Parts meet or exceed OEM specifications to ensure proper fit and function. || Image(s) is for illustration purposes only and may not represent the actual part. || Products are only sourced from quality certified manufacturing facilities.
HHP HIGHWAY & HEAVY PARTS HHP provides parts equal or better in quality compared to the OE at a fraction of the cost. || Products are crafted with hard-wearing materials for long-lasting strength and durability. || Parts meet or exceed OEM specifications to ensure proper fit and function. || Image(s) is for illustration purposes only and may not represent the actual part. || Products are only sourced from quality certified manufacturing facilities.
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1 Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Remove the winch. Refer to Disassembly and Assembly, SENR6693, "Winch - Remove" for the machine that is being serviced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00673676
Remove hose (2) from the articulated hitch area.
Drain the fuel tank into a suitable container for storage or disposal. The capacity of the fuel tank on the 515 is 185 L (50 US gal). The capacity of the fuel tank on the 525 is 265 L (70 US gal).
Open ball valve (1) in order to drain the fuel tank.
Illustration 2 g00673688
Remove two bolts (3) from the back up alarm.
Remove six bolts (4) and guard (5) .
Illustration 3 g00673698
Disconnect two electrical connectors (6) and remove backup alarm (7) .
Illustration 4 g00673743
Disconnect six electrical connectors (8) .Note: Five of the electrical connectors go to the control valve and one goes to the fuel sending unit.
Use Tooling (A) to place a vacuum on the hydraulic tank.
Disconnect two hydraulic hoses (9) .
Disconnect four hydraulic hoses (10) .
Position the wires and hydraulic hoses away from the sides of the fuel tank in order to prevent possible damage.
Illustration 5 g00673752
Disconnect three fuel hoses (11) from the fuel tank.
Remove three fittings from the fuel tank in order to allow clearance.
Illustration 6 g00673754
Disconnect fuel hose (12) from fuel tank drain valve (13) .
Remove fuel tank drain valve (13). Remove the fitting from the fuel tank in order to allow clearance.
Use Tooling (A) to place a vacuum on the hydraulic tank.
Illustration 7 g00673769
Disconnect four hydraulic hoses (14) from arch cylinders (15) .
Illustration 8 g00673777
Attach suitable lifting chains and a hoist to fuel tank (16) .
Remove four bolts (17)
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1 Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Remove the winch. Refer to Disassembly and Assembly, SENR6693, "Winch - Remove" for the machine that is being serviced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00673676
Remove hose (2) from the articulated hitch area.
Drain the fuel tank into a suitable container for storage or disposal. The capacity of the fuel tank on the 515 is 185 L (50 US gal). The capacity of the fuel tank on the 525 is 265 L (70 US gal).
Open ball valve (1) in order to drain the fuel tank.
Illustration 2 g00673688
Remove two bolts (3) from the back up alarm.
Remove six bolts (4) and guard (5) .
Illustration 3 g00673698
Disconnect two electrical connectors (6) and remove backup alarm (7) .
Illustration 4 g00673743
Disconnect six electrical connectors (8) .Note: Five of the electrical connectors go to the control valve and one goes to the fuel sending unit.
Use Tooling (A) to place a vacuum on the hydraulic tank.
Disconnect two hydraulic hoses (9) .
Disconnect four hydraulic hoses (10) .
Position the wires and hydraulic hoses away from the sides of the fuel tank in order to prevent possible damage.
Illustration 5 g00673752
Disconnect three fuel hoses (11) from the fuel tank.
Remove three fittings from the fuel tank in order to allow clearance.
Illustration 6 g00673754
Disconnect fuel hose (12) from fuel tank drain valve (13) .
Remove fuel tank drain valve (13). Remove the fitting from the fuel tank in order to allow clearance.
Use Tooling (A) to place a vacuum on the hydraulic tank.
Illustration 7 g00673769
Disconnect four hydraulic hoses (14) from arch cylinders (15) .
Illustration 8 g00673777
Attach suitable lifting chains and a hoist to fuel tank (16) .
Remove four bolts (17)
Caterpillar SIS machinery equipment:
Parts kit Caterpillar catalog:
2828401
KIT-
Caterpillar
Caterpillar
2828400
KIT-
Caterpillar
Caterpillar
2826716
KIT-DT BEARING
Caterpillar
Caterpillar
2826715
KIT-DT BEARING
Caterpillar
Caterpillar
2826714
KIT-DT BEARING
Caterpillar
Caterpillar
2826713
KIT-DT BEARING
Caterpillar
Caterpillar
2836110
KIT-SEAL
Caterpillar
Caterpillar
Caterpillar
2832244
KIT-GASKET-FS
Caterpillar
Caterpillar
2831707
KIT-GASKET-RS
Caterpillar
Caterpillar
2831227
KIT-
Caterpillar
Caterpillar
2829648
KIT-GASKET-WLG
Caterpillar
Caterpillar