2845893 KIT-SHOCK ABSORBER Caterpillar parts
613G, 621G, 623G, 627G, 631G, 637G, 657G
Rating:
Alternative (cross code) number:
CA2845893
284-5893
2845893
CA2845893
284-5893
2845893
Weight: 5 pounds 2 kg.
WHEEL TRACTOR, WHEEL TRACTOR-SCRAPER,
This part in 2 request:
Show.
This information for suppliers only!
2024-11-12
2020-10-29
Compatible equipment models: 2845893:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Brackets 2 Start By:
Remove the crankcase guard.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedure.
Refer to the Operation and Maintenance Manual, "Transmission Oil - Change" for the correct draining and filling procedures.
Illustration 1 g06337984
Remove panel assembly (1).
Remove bolts (2) and panel assembly (3).
Illustration 2 g02666917
Disconnect harness assemblies (4). Remove hose (5).
Illustration 3 g02666918
Disconnect hose assembly (6), harness assembly (7), hose assembly (8), and hose (9).
Illustration 4 g06336298
Attach Tooling (A) and suitable lifting device to transmission oil cooler (13). The weight of transmission oil cooler (13) is approximately 23 kg (51 lb).
Remove two bolts (10) and two bolts (11). Remove three bolts (12).
Illustration 5 g06336301
Remove bolts (14) and (15). Remove transmission oil cooler (13).
Illustration 6 g06336413
Remove bonnet (16) and the gasket from core assembly (17).
Remove coupling (20) from bonnet (18). Remove O-ring seals (21) from bonnet (18).
Remove O-ring seal (19) from bonnet (18).
Remove bonnet (18) and the gasket from core assembly (17).Installation Procedure
Install transmission oil cooler (13) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Brackets 2 Start By:
Remove the crankcase guard.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedure.
Refer to the Operation and Maintenance Manual, "Transmission Oil - Change" for the correct draining and filling procedures.
Illustration 1 g06337984
Remove panel assembly (1).
Remove bolts (2) and panel assembly (3).
Illustration 2 g02666917
Disconnect harness assemblies (4). Remove hose (5).
Illustration 3 g02666918
Disconnect hose assembly (6), harness assembly (7), hose assembly (8), and hose (9).
Illustration 4 g06336298
Attach Tooling (A) and suitable lifting device to transmission oil cooler (13). The weight of transmission oil cooler (13) is approximately 23 kg (51 lb).
Remove two bolts (10) and two bolts (11). Remove three bolts (12).
Illustration 5 g06336301
Remove bolts (14) and (15). Remove transmission oil cooler (13).
Illustration 6 g06336413
Remove bonnet (16) and the gasket from core assembly (17).
Remove coupling (20) from bonnet (18). Remove O-ring seals (21) from bonnet (18).
Remove O-ring seal (19) from bonnet (18).
Remove bonnet (18) and the gasket from core assembly (17).Installation Procedure
Install transmission oil cooler (13) in the reverse order of removal.
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
173B, 183B, 528, 528B, 530B, 561H, 561M, 613B, 613C, 613C II, 631C, 633D, 651E, 657E, 657G, 916, 920, 926, 930, 930R, D250B, D300B, D7G, FB518, IT18, IT28, IT28B
621E, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627E, 627F, 627G, 627H, 785B, 785C, 785D, D6K LGP, D6N, D6R III, D6T
572G, 594H, 611, 613C, 613C II, 613G, 615C, 621B, 621E, 621F, 621G, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 651E, 657E, 657G, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 824C, 825...
651E, 657E, 657G
16G, 615C, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 637E, 637G, 651E, 657E, 657G, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776, 776C, 777B, 777D, 785
14H, 14H NA, 14M, 613C, 613C II, 613G, 914G, IT12B, IT14G, IT14G2
613, 613C, 613C II, 613G
14H, 16G, 16H, 16H NA, 518C, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G
621E, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627E, 627F, 627G, 627H, 785B, 785C, 785D
631E, 631G, 633E II, 637E, 637G, 785, 785B, 785C, 789B, 789C, 793, 793B
613G, 621G, 623G, 627G, 631G, 637G, 657G, 69D, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797, 797B, AD30, AD45B, AD55, AD55B, AD60
613G, 621G, 621H, 621K, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 631G, 637G, 657G, 69D, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789...
3613087
KIT-SEAL
657G
657G
3553163
KIT-BRUSH
613G, 621G, 623G, 627G, 631G, 637G, 657G, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
613G, 621G, 623G, 627G, 631G, 637G, 657G, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
3410055
KIT-MAINTENANCE
631G, 637G, 657G
631G, 637G, 657G
928HZ, 930G
2525065
KIT-SOLENOID
928HZ, 930G
928HZ, 930G
2765434
KIT-SEAL
928HZ, 930G
928HZ, 930G
3254636
KIT-PIVOT
824H, 825H, 826H, 836H, 950 GC, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, 988H, IT62H
824H, 825H, 826H, 836H, 950 GC, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, 988H, IT62H
824H, 825H, 826H, 836H, 950 GC, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, 988H, IT62H
3326817
KIT-CONTACT
950 GC, 950G, 950H, 962G, 962H, 966G II, 966H, 972G II, 972H, 986H, 988H, IT62H
950 GC, 950G, 950H, 962G, 962H, 966G II, 966H, 972G II, 972H, 986H, 988H, IT62H
3326885
KIT-CONTACT
950 GC, 950G, 950H, 962G, 962H, 966G II, 966H, 972G II, 972H, 986H, 988H, IT62H
950 GC, 950G, 950H, 962G, 962H, 966G II, 966H, 972G II, 972H, 986H, 988H, IT62H
120K, 120M, 12K, 12M, 12M 3, 12M 3 AWD, 140K, 140M, 140M 3, 140M 3 AWD, 160M, 160M 3, 160M 3 AWD, 950H, 950K, 962H, 962K, IT62H
3247871
KIT-FAN BLADE
950H, 950K, 962H, 962K, IT62H
950H, 950K, 962H, 962K, IT62H