2884735 KIT-GASKET-FS Caterpillar parts
Rating:
Alternative (cross code) number:
CA2884735
288-4735
2884735
CA2884735
288-4735
2884735
Weight: 0.11 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Polaris Off Road Heater Kit
Polaris Includes 1 (one) heater kit || Connects to Polaris PULSE Bus Bar to provide reliable, steady heat to your cab with fan speed and temperature control || Heater core mounts under dash to provide comfortable riding in colder weather || Temperature and Fan Speed control || Selectable vent positions include driver/passenger, defrost or a combination of both
Polaris Includes 1 (one) heater kit || Connects to Polaris PULSE Bus Bar to provide reliable, steady heat to your cab with fan speed and temperature control || Heater core mounts under dash to provide comfortable riding in colder weather || Temperature and Fan Speed control || Selectable vent positions include driver/passenger, defrost or a combination of both
Polaris Off Road Heater Kit
Polaris Includes 1 (one) heater kit || Connects to Polaris PULSE Bus Bar to provide reliable, steady heat to your cab with fan speed and temperature control || Heater core mounts under dash to provide comfortable riding in colder weather || Temperature and Fan Speed control || Selectable vent positions include driver/passenger, defrost or a combination of both
Polaris Includes 1 (one) heater kit || Connects to Polaris PULSE Bus Bar to provide reliable, steady heat to your cab with fan speed and temperature control || Heater core mounts under dash to provide comfortable riding in colder weather || Temperature and Fan Speed control || Selectable vent positions include driver/passenger, defrost or a combination of both
Polaris Off Road Heater Kit
Polaris Includes 1 (one) heater kit || Connects to Polaris PULSE Bus Bar to provide reliable, steady heat to your cab with fan speed and temperature control || Heater core mounts under dash to provide comfortable riding in colder weather || Temperature and Fan Speed control || Selectable vent positions include driver/passenger, defrost or a combination of both
Polaris Includes 1 (one) heater kit || Connects to Polaris PULSE Bus Bar to provide reliable, steady heat to your cab with fan speed and temperature control || Heater core mounts under dash to provide comfortable riding in colder weather || Temperature and Fan Speed control || Selectable vent positions include driver/passenger, defrost or a combination of both
For full view, you need register
Information:
Engine C175 EnginesIntroduction
This special instruction describes where to use the 370-8028 Integral Seal and the 394-0295 Integral Seal. Verify that the correct integral seal is used prior to installing the cylinder head. If using a single cylinder head gasket kit for a field repair, verify that the kit contains the same integral seal part number as the integral seal that is removed from the engine.Reference Section
The 370-8028 Integral Seal (Standard Integral Seal) is for use on a cylinder block that has not had the top deck milled or on a cylinder block that has been milled. The cylinder block has a top deck height between 112.325 mm (4.4222 inch) and 112.675 mm (4.4360 inch).The 394-0295 Integral Seal (Thicker Integral Seal) is for use on a cylinder block that has had the top deck milled. The cylinder block has a top deck height between 112.000 mm (4.4094 inch) and 112.325 mm (4.4222 inch).Refer to Table 1 and Illustration 1 for additional information.
Table 1
Top Deck Height Requirements and Integral Seal Part Numbers
Part Number Top Deck Height Minimum Valve Maximum Value
370-8028 Dimension (G)(1) 112.325 mm (4.4222 inch) 112.675 mm (4.4360 inch)
394-0295 Dimension (G)(1) 112.000 mm (4.4094 inch) 112.325 mm (4.4222 inch)
(1) Refer to dimension (G) in Illustration 1.
Illustration 1 g06071400
This special instruction describes where to use the 370-8028 Integral Seal and the 394-0295 Integral Seal. Verify that the correct integral seal is used prior to installing the cylinder head. If using a single cylinder head gasket kit for a field repair, verify that the kit contains the same integral seal part number as the integral seal that is removed from the engine.Reference Section
The 370-8028 Integral Seal (Standard Integral Seal) is for use on a cylinder block that has not had the top deck milled or on a cylinder block that has been milled. The cylinder block has a top deck height between 112.325 mm (4.4222 inch) and 112.675 mm (4.4360 inch).The 394-0295 Integral Seal (Thicker Integral Seal) is for use on a cylinder block that has had the top deck milled. The cylinder block has a top deck height between 112.000 mm (4.4094 inch) and 112.325 mm (4.4222 inch).Refer to Table 1 and Illustration 1 for additional information.
Table 1
Top Deck Height Requirements and Integral Seal Part Numbers
Part Number Top Deck Height Minimum Valve Maximum Value
370-8028 Dimension (G)(1) 112.325 mm (4.4222 inch) 112.675 mm (4.4360 inch)
394-0295 Dimension (G)(1) 112.000 mm (4.4094 inch) 112.325 mm (4.4222 inch)
(1) Refer to dimension (G) in Illustration 1.
Illustration 1 g06071400
Parts kit Caterpillar catalog:
Caterpillar
Caterpillar
Caterpillar
2884388
KIT-GASKET-FS
Caterpillar
Caterpillar
2884090
KIT-
Caterpillar
Caterpillar
2884089
KIT-
Caterpillar
Caterpillar
Caterpillar
2885475
KIT-GASKET-FS
Caterpillar
Caterpillar
2885215
KIT-
Caterpillar
Caterpillar
2884804
KIT-GASKET-FS
Caterpillar
Caterpillar
2884776
KIT-GASKET-FS
Caterpillar
Caterpillar
2884740
KIT-GASKET-FS
Caterpillar
Caterpillar