2922542 KIT-GASKET-MCH Caterpillar parts
Rating:
Alternative (cross code) number:
CA2922542
292-2542
2922542
CA2922542
292-2542
2922542
Weight: 7 pounds 3 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
2922542 Gasket KIT (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: ENGINE - INDUSTRIAL: 3412E. || Condition: NEW AFTERMARKET || Weight: 12.87 lbs Dimensions: 10-15.59-53.7 in || Related Items: 2511218, m2922542 || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Fits equipment: ENGINE - INDUSTRIAL: 3412E. || Condition: NEW AFTERMARKET || Weight: 12.87 lbs Dimensions: 10-15.59-53.7 in || Related Items: 2511218, m2922542 || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
For full view, you need register
Information:
Machine with a Boom Lowering Control Valve
Boom load may cause cylinder oil pressure to reach relief pressure of the boom lowering control device when the boom is supported by one cylinder. Boom can lower suddenly, causing possible injury or death.To avoid possible injury or death, be sure no one is under or near the work tool before manually lowering the boom.Keep all personnel away from the boom drop area when lowering the boom with the engine stopped.
If the engine is shut down or the hydraulic system is disabled, the operator can still lower the boom. Use the following procedure if the machine is equipped with a boom lowering control valve.
Illustration 1 g00101574The boom lowering control valve is at the back of the base of the boom. The boom lowering control valve allows the operator to manually lower the boom if the engine is stopped.
Illustration 2 g01753942
(1) Locknut
(2) Check valve
(3) Boom lowering control device Note: The locknut (1) and the check valve (2) is located on the bottom side of the boom lowering control device (3).
Loosen locknut (1).
Slowly turn check valve (2) counterclockwise until the check valve stops. The boom will lower to the ground.
Make sure that the work tool has been lowered onto the ground. Tighten check valve (2) to a torque of 2.25 0.25 N m (1.66 0.18 lb ft).
Tighten locknut (1) to a torque of 4 0.5 N m (3 0.37 lb ft).
Before you begin operating the machine, make any necessary repairs. For additional information, consult your Cat dealer.
Boom load may cause cylinder oil pressure to reach relief pressure of the boom lowering control device when the boom is supported by one cylinder. Boom can lower suddenly, causing possible injury or death.To avoid possible injury or death, be sure no one is under or near the work tool before manually lowering the boom.Keep all personnel away from the boom drop area when lowering the boom with the engine stopped.
If the engine is shut down or the hydraulic system is disabled, the operator can still lower the boom. Use the following procedure if the machine is equipped with a boom lowering control valve.
Illustration 1 g00101574The boom lowering control valve is at the back of the base of the boom. The boom lowering control valve allows the operator to manually lower the boom if the engine is stopped.
Illustration 2 g01753942
(1) Locknut
(2) Check valve
(3) Boom lowering control device Note: The locknut (1) and the check valve (2) is located on the bottom side of the boom lowering control device (3).
Loosen locknut (1).
Slowly turn check valve (2) counterclockwise until the check valve stops. The boom will lower to the ground.
Make sure that the work tool has been lowered onto the ground. Tighten check valve (2) to a torque of 2.25 0.25 N m (1.66 0.18 lb ft).
Tighten locknut (1) to a torque of 4 0.5 N m (3 0.37 lb ft).
Before you begin operating the machine, make any necessary repairs. For additional information, consult your Cat dealer.
Caterpillar SIS machinery equipment:
Parts kit Caterpillar catalog:
Caterpillar
2922000
KIT MAIN
Caterpillar
Caterpillar
2921998
KIT BIG END
Caterpillar
Caterpillar
2921997
KIT BIG END
Caterpillar
Caterpillar
Caterpillar
Caterpillar
2922656
KIT-NX (A/C)
Caterpillar
Caterpillar
2922650
KIT-NX (A/C)
Caterpillar
Caterpillar
2922645
KIT-NX (A/C)
Caterpillar
Caterpillar
2922590
KIT-NX (A/C)
Caterpillar
Caterpillar
2922588
KIT-NX (A/C)
Caterpillar
Caterpillar
2922577
KIT-NX (A/C)
Caterpillar
Caterpillar