KIT-GAS STRUT 2934808 - Caterpillar

The cushion-hitch dampening valve is on the right-hand side of the tractor below the cushion-hitch accumulators.Load Cylinder
Illustration 5 g06216195The load cylinder is mounted to the hitch frame. The cushion-hitch position sensor is located in the load cylinder.Pilot Control Manifold
Illustration 6 g06216198The pilot control manifold is on the left side of the hitch assembly. The pilot control manifold contains the pressure reducing valve for the pilot system and the cushion-hitch leveling solenoid.Cushion-Hitch/Pilot Oil Filter
Illustration 7 g06216200The cushion-hitch/pilot oil filter is located in the center rear of the tractor.Implement Pump
Illustration 8 g06216212The implement pump is mounted to the transfer case at the rear of the tractor. The implement pump provides system pressure for implements added to the tractor.Implement Control Valve, Pilot Control Solenoid, and Pilot Oil Accumulator
Illustration 9 g06216215The implement control valve, pilot control solenoid, and pilot oil accumulator are on the right-hand side of the rear of the tractor.Hydraulic Tank
Illustration 10 g06216220Hydraulic oil tank is located on the right-hand side of the machine. The hydraulic oil temperature sensor is mounted in the hydraulic oil tank. The hydraulic return filter is located inside the hydraulic oil tank.The implements and the cushion hitch systems are supplied by the hydraulic oil tank.Implement Joystick
Illustration 11 g03419081The Implement Joystick is located on the right side of the operator station inside the cab.The Joystick is used to operate implements attached to the tractor.Cushion-Hitch Switch
Illustration 12 g03419088The cushion-hitch switch is located on the joystick control on the right side of the operator seat. The cushion-hitch switch is used by the operator to activate or deactivate the cushion-hitch system.Implement Lockout Switch
Illustration 13 g03717468The implement lockout switch is located on the console to the right side of the operator seat. The implement lockout switch prevents movement of the implement system.Implement Electronic Control Module
Illustration 14 g03419729The implement electronic control module is located behind the operator's seat, in the rear access panel. The electronic control module controls all electronic signals from the implement system, including solenoids, sensors, and switches.Cushion-Hitch ECM
Illustration 15 g03717471The cushion-hitch electronic control module is mounted to the cushion-hitch accumulator bracket on the right side of the tractor.