KIT-SERVICE 2U6897 - Caterpillar

Illustration 1 g00977296
Support the work tool with Tooling (A), as shown.
Illustration 2 g00977297
Disconnect hose assemblies (1) and (2).
Illustration 3 g00977312
Disconnect harness assemblies (3), (4), and (5).
Disconnect hose (6).
Illustration 4 g00977299
Disconnect hose assemblies (7), (8), and (9).
Illustration 5 g00977318
Attach a suitable lifting device to rear frame (10). The weight of rear frame (10) is approximately 159 kg (350 lb).
Illustration 6 g00977325
Illustration 7 g00977323
Remove the bolts (11) from plates (12), (13), and (14) at the top and at the bottom of the rear frame.
Remove the rear frame from the work tool. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 180-3032 Repair Stand Set 4
Illustration 8 g00977318
Illustration 9 g00977323
Illustration 10 g00977325
Attach a suitable lifting device to rear frame (10). The weight of rear frame (10) is approximately 159 kg (350 lb). Position the rear frame on the work tool.
Install plates (14), (13), and (12) and bolts (11) at the top and at the bottom of the rear frame.
Illustration 11 g00977299
Connect hose assemblies (9), (8), and (7).
Illustration 12 g00977312
Connect hose (6).
Connect harness assemblies (5), (4), and (3).
Illustration 13 g00977297
Connect hose assemblies (2) and (1).
Illustration 14 g00977296
Raise the work tool and remove Tooling (A).