KIT-PUMP 2W9253 - Caterpillar

Store Button
When this application feature is active, the store button is used to store the current truck information to memory. Storing the truck information also resets the current truck weight, remaining weight, and pass count. The following information is stored:
Truck ID
Material ID
Pass Count
Truck Weight
Time and Date of the Truck
Weight of each pass
Time and Date of each passAuto-Store
The Auto-Store feature will automatically store data every 25 passes if the payload information is not stored or cleared. The stored passes will remain on the screen until a key cycle is performed, the store button is pressed, or the truck is cleared. The same information is stored as with a manual store button press. -1/Truck Clear Button
The -1 button will remove the weight of the most recent pass from the truck and decrement the pass count by 1. The Truck Clear button will be displayed if the -1 button has been pressed and the pass count remains greater than 0. If the Truck Clear button is pressed, the following occurs:
All remaining weight will be removed from the truck
The pass count will be reset to 0
The data will not be stored to memoryNote: If an Auto Store has occurred on the current truck, the data already stored will remain in memory. TIP OFF
TIP OFF - A live, estimated weight is shown on the screen while partially dumping a bucket. The attributes of tip off are:
The live weight is most accurate at mid-lift height
Eliminates the need to press "-1" after partially dumping the bucket
Allows faster cycle time on final pass of truck loading
Less accurate than the scaled weightNote: For best accuracy, confirm tip off weight with scaled weight by lifting final payload through the weigh range. Selecting Tip Off Mode
Settings > Payload > Tip Off ModeThe tip off mode is selected in the Payload Settings menu and is indicated in the main payload screen. Following are the three tip off mode options:Stock Pile Tip Off - Used for discarding excess material at the stock pile. The expectation is that the material remaining in the bucket is fully dumped into the truck. Truck Tip Off - Used for tipping material directly into the truck, tipped off material is added to the truck weight. Disabled - No tip off mode is active.TIP OFF MODES
Following is a list of tip off modes:STOCKPILE TIP OFF MODE
The Stockpile Tip Off mode has the following attributes:
As soon as a weight is measured (Estimated or Scaled) that weight is added to the truck total and removed from the remaining truck weight.
The system enters tip off mode after a weight has been measured, and the bucket is tipped partially. "Zero" on the payload screen changes to "Tip Off Toggle" once Tip Off mode is active. A live estimated weight will be shown (no Green Box).
As material is dumped out of the bucket, and the estimated bucket weight decreases, the truck weight decreases and the remaining truck weight increases.
When the desired truck weight is achieved, rack back the bucket completely before dumping