KIT-GAUGE 3039937 - Caterpillar

Illustration 1 g01514206
Right side view of engineNote: Lubricate the washer face and the threads of nuts and washers of the temperature sensor (1) with 4C-5599 Anti-Seize Compound before assembly. (1) Torque for the temperature sensor ... 45 5 N m (33 4 lb ft) (2) Torque for the band clamp that holds the ARD to the turbocharger ... 11 2 N m (95 18 lb in) (3) Torque for the temperature sensor ... 47.5 4.0 N m (35 3 lb ft)
Illustration 2 g01514208
Rear view of engine (4) Torque for the spark plug ... 47.5 4.0 N m (35 3 lb ft) (5) Torque for the hose assembly ... 26 N m (19 lb ft) (6) Torque for the hose assembly ... 43 N m (32 lb ft)
Illustration 3 g01514210
Note: Lubricate the threads of taperlock stud (7) on both the ends with 4C-5599 Anti-Seize Compound before assembly. (7) Torque for five taperlock studs ... 17 2 N m (13 1 lb ft)Tighten the locknuts in a crisscross pattern. Refer to Illustration 3 for the numerical sequence. Follow the steps that are listed below.
In the numerical sequence, tighten the locknuts in a crisscross pattern 23 3 N m (17 2 lb ft).
In the numerical sequence, again tighten the locknuts to 28 3 N m (21 2 lb ft).
In the numerical sequence, again tighten the locknuts to 28 3 N m (21 2 lb ft).