KIT-MOTOR REPAIR 3095869 - Caterpillar

ACTION REQUIRED
Replace the existing flywheel housing with a flywheel housing that has a machined groove in the mating surface for a Press-In-Place (PIP) seal.
Refer to KENR6052, Disassembly and Assembly.
For each group there are two repair options available:
Repair Option 1: Replace the existing flywheel housing using the flywheel housing that is listed in the Parts Needed.
Repair Option 2: Machine a groove in the mating surface for a PIP seal in the existing flywheel housing. Contact Mike Minks (minks_michael) for the prints.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-9000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 152.0-hour job for Group 1
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
An additional miscellaneous cost of up to $1000 for each Off-Highway Truck will be allowed for dealers that choose to machine the groove in the flywheel housing instead of ordering one from the parts system. This is to be used for dealer labor or charges incurred from a local machining center. The dealers invoice or quote must be attached to the claim.
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-9000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 152.0-hour job for Group 2
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
An additional miscellaneous cost of up to $1000 for each Off-Highway Truck will be allowed for dealers that choose to machine the groove in the flywheel housing instead of ordering one from the parts system. This is to be used for dealer labor or charges incurred from a local machining center. The dealers invoice or quote must be attached to the claim.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.