KIT-OIL (CTMN) 3105744 - Caterpillar

Illustration 28 g06346923
Install rods (25) and O-ring seal (26).
Illustration 29 g06346927
Install piston (24) and the spring. Install piston (23) and the spring.
Illustration 30 g06346934
Install bearing (28) into head (22).
Use Tooling (H) to adhere port plate (29) onto head.
Ensure bushing (22) is properly located in head (22).
Illustration 31 g02352440
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Attach Tooling (A) and a suitable lifting device to head (22).
Install head (22).
Illustration 32 g02352438
Install bolts (21). Tighten bolts (21) to a torque of 830 N m (610 lb ft).
Illustration 33 g06346938
Install retaining ring (27) onto the shaft.
Illustration 34 g02352435
Install impeller (20). Install retaining ring (19).
Illustration 35 g02352414
Install the O-ring seal, flange (18), and bolts (17). Tighten bolts (17) to a torque of 215 N m (160 lb ft).
Illustration 36 g02352380
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (11), retainer (12), spring (13), retainer (14), O-ring seal (15), and valve (16).
Illustration 37 g02352372
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (5), retainer (6), spring (7), retainer (8), O-ring seal (9), and valve (10).
Illustration 38 g01167846
Install O-ring seals (4).
Illustration 39 g02352367
Install valve (2) and bolts (3). Tighten bolts (3) to a torque of 21 5 N m (186 44 lb in).
Illustration 40 g01167844
Install plug (1) and the O-ring seal. Tighten plug (1) to a torque of 198 N m (145 lb ft).End By:
Install the steering piston pump.