KIT-SEAL 3153648 - Caterpillar

Illustration 18 g02291135
Connect hose assemblies (30).
Illustration 19 g02291101
Connect hose assemblies (29) and hose assemblies (28).
Illustration 20 g02290835
Attach Tooling (A) and a suitable lifting device to door assembly (27). The weight of door assembly (27) is approximately 102 kg (225 lb). Install door assembly (27).
Illustration 21 g02290713
Connect harness assembly (26).
Illustration 22 g02290653
Connect hose assembly (25), hose assemblies (24), and hose assembly (23).
Illustration 23 g02290574
Connect hose assemblies (22), hose assemblies (21), and hose assemblies (20).
Illustration 24 g02290537
Install hose assembly (19) and the hose clamps. Connect hose assemblies (18) and hose assemblies (17).
Illustration 25 g02290237
Connect brackets (14) and (13) with the filter assemblies. Connect harness assemblies (16) and (15).
Illustration 26 g02290115
Connect hose assemblies (11) and hose clips (12).
Illustration 27 g02289573
Position test ports assembly (9) and install bolts (10).
Illustration 28 g02284014
Attach a suitable lifting device to tank assembly (7). The weight of tank assembly (7) is approximately 125 kg (275 lb). Position tank assembly (7) and install bolts (8).
Illustration 29 g02283974
Connect hose assemblies (6). Connect tube assemblies (5). Connect harness assembly (4).
Illustration 30 g02361015
Turn battery disconnect switch (3) to the ON position.
Illustration 31 g02283841
Install panel assemblies (2).
Illustration 32 g02283537
Attach a suitable lifting device to door assembly (1). The weight of door assembly (1) is approximately 45 kg (100 lb). Install door assembly (1). End By:
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Install the input drive shaft.
Install the hood and the engine enclosure.