KIT-DIAPHRAGM 3196059 - Caterpillar

Engine Lifting
When it is necessary to remove a component, remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees. Eye bolts and brackets should never be bent and should only be loaded in tension.
Use a hoist to remove heavy components. Lift the engine by using an adjustable lifting beam. All of the supporting members (chains and cables) should be parallel to each other, and as near perpendicular as possible to the top of the object that is being lifted.Some removals require the use of lifting fixtures in order to obtain proper balance and to provide safe handling. Lifting eyes are designed for the arrangement as sold. Alterations to the lifting eyes and/or to the arrangement weight make the lifting devices inadequate and deficient. If you make alterations, you are responsible for providing adequate lifting devices. To remove the engine, use the two lifting eyes that are on the front and the rear of the engine.Engine Storage
Special precautions should be taken for engines that will remain out of service for prolonged time periods.The lubricating oil will drain from the cylinder walls and from the piston rings of engines that are not started for several weeks. Rust can form on the cylinder liner surface, which will increase engine wear and may result in shorter engine service life.Check the cooling system for adequate protection against freezing (if applicable). A 50/50 solution of Caterpillar (permanent-type) Antifreeze and approved water will provide protection to -37°C (-34°F).Refer to SEHS9031, Storage Procedures For Caterpillar Products, for more detailed information on engine storage. Consult with your Caterpillar dealer for instructions to prepare your engine for longer storage periods.