KIT-CYLINDER SEAL 3196753 - Caterpillar

Remove port plate (29) .
Illustration 14 g01233906
Remove cap (30) and the screw.
Illustration 15 g01233908
Remove swashplate (32) and barrel assembly (31) as one piece.
Illustration 16 g01233909
Illustration 17 g01233910
Remove bolts (36) from swashplate (32). Note: Bolts (36) should be replaced with new bolts.
Remove retainers (35) from swashplate (32).
Remove barrel assembly (31) from swashplate (32).
Remove pistons (33) and retaining plate (34) from barrel assembly (31) .
Illustration 18 g01233911
Illustration 19 g01233912
Remove bearing (37) from barrel assembly (31) .
Remove cup springs (39) and shims (40) from barrel assembly (31) .Note: Mark orientation of cup springs (39) and shims (40) for installation.
Illustration 20 g01233914
Remove retainers (41) .
Repeat Step 24 for the opposite side.
Illustration 21 g01233916
Remove rods (42) from swashplate (32) .
Illustration 22 g01233917
Remove bearings (43 ) .
Illustration 23 g01233919
Remove outer races (45) from housing (44) .
Illustration 24 g01232908
Use Tooling (C) in order to remove retaining ring (48) .
Remove cover (49) .
Illustration 25 g01232909
Remove lip seal (50) .
Illustration 26 g01232911
Remove O-ring seal (51), bearing (52), and shaft (53).
Illustration 27 g01233922
Use Tooling (A) in order to remove retaining ring (54) from shaft (53) .
Illustration 28 g01233923
Use a suitable press in order to remove bearing (52) from shaft (53) .