KIT-WHEEL HUB 3208559 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 421-5661 Lifting Eye Assembly 2 Start By:
Remove the cab.
Release the hydraulic system pressure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03727783
Disconnect hose assemblies (1) and move hose assemblies (1) out of the way.
Illustration 2 g03727788
Remove tube assembly (4).
Disconnect hose assemblies (5) and move hose assemblies (5) out of the way.
Disconnect elbow (2) in order to move hose assembly (3) out of the way.
Illustration 3 g03727865
Disconnect clips (9). Disconnect tube assembly (8) and move tube assembly (8) out of the way.
Disconnect hose assembly (7) and hose assemblies (6).
Illustration 4 g03728062
Attach Tooling (A) and a suitable lifting device to steering control valve (11). The weight of steering control valve (11) is approximately 26 kg (57 lb).
Remove bolts (10) and the washers. Use Tooling (A) and the suitable lifting device in order to remove steering control valve (11). Installation Procedure
Install steering control valve (11) in the reverse order of removal.