AVSPARE.COM
parts catalog

KIT-CTWT 3236461 - Caterpillar



3236461 KIT-CTWT Caterpillar parts KIT
Rating:
76
Alternative (cross code) number:
CA3236461
323-6461
3236461
Caterpillar 3236461 KIT-CTWT

Buy KIT-CTWT 3236461 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 8 g01329095
Remove bearing cup (15) from the output transfer gear housing.
Illustration 9 g01329097
Use a suitable lifting device to reposition the output transfer gear assembly (3) into the upright position. The weight of output transfer gear assembly (3) is approximately 300 kg (661 lb).
Remove nuts (16) and bearing cage assembly (17).Note: If necessary, use two forcing bolts to remove bearing cage assembly (17) from output transfer gear assembly (3).
Illustration 10 g01151765
Remove spacer (18) and inner bearing (19).
Illustration 11 g01151766
Remove lip seal (20), bearing race (21), and O-ring seal (22) from bearing cage assembly (17).
Illustration 12 g01329108
Remove bolt (23), yoke retainer (24), and O-ring seal (25) (not shown).
Remove yoke assembly (26) from the output shaft.
Illustration 13 g00454364
Remove bolts (27) and bearing retainer (28).
Illustration 14 g00454366
Remove lip seal (29) from bearing retainer (28).
Illustration 15 g00454407
Illustration 16 g01331895
Use a suitable lifting device to hold output transfer gear (30) in position.
Use a suitable soft faced hammer to push output shaft (31) from output transfer gear (30).
Remove output shaft (31) and bearing cage (32) from the output transfer gear assembly.Note: If necessary, use Tooling (C) to remove bearing cage (32) from the output transfer gear assembly.
Remove output transfer gear (30).
Illustration 17 g00454413Note: The output shaft is free to fall when the bearing cone is removed.
Use a suitable press to push output shaft (31) from bearing cage (32).
Remove O-ring seal (33) from bearing cage (32). Remove the O-ring seal from the opposite side of bearing cage (32).
Illustration 18 g00454414
Use Tooling (B) and a suitable press to remove bearing cones and bearing cups from bearing cage (32).
Illustration 19 g00454415
Remove bolts (34) and covers (35) from the output transfer gear assembly.
Illustration 20 g00454416
Remove gasket (36). Remove O-ring seal (38) from the cover.
Remove suction screen (37).
Illustration 21 g06290234
Separate suction screen (37) from screen tube assembly (39).
Remove magnet assembly (40) from screen tube assembly (39).
Illustration 22 g06290248
Remove drain plug (42) from the output transfer gear assembly. Remove O-ring seal (41) from drain plug (42).


Parts kit Caterpillar catalog:

3234174 KIT-
Caterpillar
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.