KIT- 3259472 - Caterpillar

Table 1
New Part Number Description Former Part Number(1)
541-6395 Implement Software Gp 533-6132
(1) The former part number listed is for reference only and may differ.Note: The new software is available in the form of a flash file through the Caterpillar Service Information System (SIS). Go to SIS web to make sure that the new flash file part number is still the latest flash file part number. A newer flash file part number may be available. SIS only displays the latest available flash file.Note: Batch update 2016 software must be installed as a package. This software must be flashed along with the new Transmission, Telematics, Information display, and Object detection software from the same package (Batch update 2016).Note: After flashing new software to an Electronic Control Module (ECM) or multiple ECMs, always reset the ECM by cycling the power supply. Turn the key start switch to the OFF position. Wait ten seconds. Turn the key start switch to the ON position or start the engine. Verify that the operation of the machine is correct and that no new diagnostics have been activated.Note: Cat® Electronic Technician (Cat ET), release 2017A or later is required to configure machine hardware after flash is complete.The new transmission software is adaptable to the products within the listed serial numbers.