KIT-SEAL 3276314 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00545445
Typical example
Loosen two clamps (1) .
Slide hose (2) away from turbocharger (3) .
Remove two bolts (4) and the gasket.
Disconnect oil return line (6) from the cylinder block and remove the gasket.
Remove nuts (5) .
Illustration 2 g00545446
Typical example
Remove three bolts (7) .
Remove turbocharger (3) and the gaskets.
Plug all openings immediately.