3337435 KIT-ROADING CONVERSION Caterpillar parts
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
Rating:
Alternative (cross code) number:
CA3337435
333-7435
3337435
CA3337435
333-7435
3337435
Weight: 9 pounds 4 kg.
COMPACT TRACK LOADER, SKID STEER LOADER,
Compatible equipment models: 3337435:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3 Start By:
Remove the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Remove".
Remove the oil filter and base. Refer to Disassembly and Assembly, "Oil Filter and Base (Power Train) - Remove and Install".
If equipped, remove the rear PTO shaft. Refer to Disassembly and Assembly, "Pump Drive - Remove".Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all harness assemblies for installation purposes.
Illustration 1 g01362313
Attach Tooling (A) and a suitable lifting device to torque converter housing (1). The weight of torque converter housing (1) is approximately 45 kg (100 lb).
Disconnect harness assembly (2) .
Illustration 2 g01362318
Disconnect harness assembly (4) .
Remove bolts (6) .
Remove three bolts (3) (not shown).
Remove bolts (5) .
Use Tooling (A) and the suitable lifting device in order to remove torque converter housing (1) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3 Start By:
Remove the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Remove".
Remove the oil filter and base. Refer to Disassembly and Assembly, "Oil Filter and Base (Power Train) - Remove and Install".
If equipped, remove the rear PTO shaft. Refer to Disassembly and Assembly, "Pump Drive - Remove".Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all harness assemblies for installation purposes.
Illustration 1 g01362313
Attach Tooling (A) and a suitable lifting device to torque converter housing (1). The weight of torque converter housing (1) is approximately 45 kg (100 lb).
Disconnect harness assembly (2) .
Illustration 2 g01362318
Disconnect harness assembly (4) .
Remove bolts (6) .
Remove three bolts (3) (not shown).
Remove bolts (5) .
Use Tooling (A) and the suitable lifting device in order to remove torque converter housing (1) .
Caterpillar SIS machinery equipment:
Caterpillar SIS
297C Multi Terrain Loader GCP00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
262C Skid Steer Loader MST00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
272C Skid Steer Loader RED00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
277C Multi Terrain Loader JWF00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
287C Multi Terrain Loader MAS00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
246C Skid Steer Loader JAY00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
256C Skid Steer Loader DWS00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
279C Compact Track Loader MBT00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
289C Compact Track Loader JMP00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
299C Compact Track Loader JSP00001-UP (MACHINE) POWERED BY 3044C Engine »
333-7435
KIT-ROADING CONVERSION
262C2 Skid Steer Loader TMW00001-UP (MACHINE) POWERED BY C3.4 Engine »
333-7435
KIT-ROADING CONVERSION
277C2 Multi Terrain Loader MET00001-UP (MACHINE) POWERED BY C3.4 Engine »
333-7435
KIT-ROADING CONVERSION
287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engine »
333-7435
KIT-ROADING CONVERSION
289C2 Compact Track Loader RTD00001-UP (MACHINE) POWERED BY C3.4 Engine »
333-7435
KIT-ROADING CONVERSION
279C2 Compact Track Loader KWB00001-UP (MACHINE) POWERED BY C3.4 Engine »
333-7435
KIT-ROADING CONVERSION
Parts kit Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 216, 216B, 216B3, 226B, 226B3, 232B, 236, 236B, 236B3, 242B, 242B3, 246C, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C...
216, 216B3, 226B3, 228, 236, 236B, 236B3, 242B, 242B3, 246C, 247, 247B, 247B3, 248, 252B3, 256C, 257B3, 259B3, 262C, 267, 267B, 268B, 272C, 277C, 287, 287C, 297C, 904B, 904H
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 267, 267B, 268B,...
216, 216B, 226B, 228, 232B, 236, 236B, 242B, 246C, 247, 247B, 248, 252B, 256C, 257B, 262C, 267, 267B, 268B, 272C, 277C, 287, 287C, 297C
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 267, 267B, 268B, 272C, 277C, ...
216B, 216B3, 226B, 226B3, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267B, 268B, 272C, 272D, 2...
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 906, 906H, 907H, 908H, C3.4
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 906, 906H, 907H, 908H, C3.4
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 906, 906H, 907H, 908H, C3.4
236B, 246C, 252B, 256C, 262C, 267B, 268B, 272C, 277C, 279C, 287C, 289C, 297C, 299C
242B3, 242D, 246C, 252B, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C
140H, 143H, 14H, 160H, 163H, 345B, 345B II, 345B II MH, 345B L, 572R II, 814F, 815F, 816F, 966G II, C-10, C-12, D7R II, W345B II
16G, 245, 3406, 621B, 623B, 824C, 825C, 826C, 980C, 983B
784B, 785B, 789B
4426592
KIT-STEP
621G, 623G, 627G, 631G, 637G, 657G
621G, 623G, 627G, 631G, 637G, 657G
3507199
KIT-CUTTER BIT
PM-102, PM-200, PM-201, PM-465, PM-565, PM-565B, PR-1000, PR-450C, RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
PM-102, PM-200, PM-201, PM-465, PM-565, PM-565B, PR-1000, PR-450C, RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
4405588
KIT-SEAT
311D LRR, 312D, 312D L, 314E CR, 315D L, 319D L, 319D LN, 320D, 320D LN, 320D LRR, 320D RR, 320E L, 324D, 324D L, 325D L, 330D L, 336D
311D LRR, 312D, 312D L, 314E CR, 315D L, 319D L, 319D LN, 320D, 320D LN, 320D LRR, 320D RR, 320E L, 324D, 324D L, 325D L, 330D L, 336D
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516B, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, G3508, G3512, PM3508
1904755
KIT-BRAKE INDICATOR CONVERSION
426C, 436C, 438C
426C, 436C, 438C
20R1109
KIT-ENGINE OVERHAUL
D8R II
D8R II
20R1106
KIT-ENGINE OVERHAUL
D8R II
D8R II
572R, 583R, D7R, D8N, D8R, D8R II