KIT-SEAL 3351414 - Caterpillar

Illustration 10 g00332260
Reposition the output transfer gear group , as shown.
Remove bolt (15) and yoke retainer (16) from the output shaft.
Illustration 11 g00332261
Remove yoke assembly (17) from the output shaft.
Illustration 12 g00332262
Remove bolts (18) .
Illustration 13 g00332263
Use Tooling (D) to remove bearing cage assembly (19) from the output transfer gear housing.
Illustration 14 g00332264
Remove bearing cage assembly (19) .
Illustration 15 g01174401
Remove lip seal (20) from bearing cage assembly (19) .
Illustration 16 g00332268
Remove bearing cup (21) and O-ring seal (22) from the bearing cage assembly.
Illustration 17 g00332269
Use a suitable lifting device to hold output transfer gear (23) in position.
Use Tooling (B) to push output shaft (25) from transfer gear (23) and from bearing cone (24) .
Remove transfer gear (23) from output shaft (25) .
Illustration 18 g00332271
Remove output shaft (25) and bearing cone (24) from the output transfer gear housing.
Illustration 19 g00332272
Note: The output shaft is free to fall when the bearing cone is removed.
Use a suitable press and Tooling (C) to push the output shaft from bearing cone (24) .
Illustration 20 g00332274
Remove transfer gear (23) from the output transfer gear housing.
Illustration 21 g00332275
Remove bolts (26) and cover (27) from the output transfer gear housing.
Illustration 22 g00333661
Remove O-ring seal (28) from cover (27) .
Illustration 23 g00332278
Remove suction screen (30) and screen tube assembly (29) .
Illustration 24 g00332280
Separate suction screen (30) from screen tube assembly (29) .
Remove magnet assembly (31) from screen tube assembly (29) .