KIT-SHIM 3438866 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Personal injury can result from removing hoses or fittings in a pressure system.Failure to relieve pressure can cause personal injury.Do not disconnect or remove hoses or fittings until all pressure in the system has been relieved.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Cat Dealer Service Tool Catalog" or refer to Special Publication, PECJ0003, "Cat Shop Supplies and Tools Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
If a coolant hose needs to be replaced, drain the coolant to a level that is below the hose. Drain the coolant into a suitable clean container. The coolant can be reused.
After replacing a damaged hose or clamp, fill the affected system to the proper fluid level, start the engine, and operate the engine at low idle. Check for leaks, and make necessary repairs.Air Hoses
Illustration 3 g06117580
Inspect the air hoses.
Illustration 4 g06117631
Inspect the air hoses.Cooling Hoses
Illustration 5 g06117630
Inspect the cooling hoses.
Illustration 6 g06117634
Inspect the cooling hoses.
Illustration 7 g06117643
Inspect the cooling hoses.
Illustration 8 g06117650
Inspect the cooling hoses.
Illustration 9 g06117668
Inspect the cooling hoses.
Illustration 10 g06117672
Inspect the cooling hoses.Engine Oil Hoses
Illustration 11 g06117674
Inspect the engine oil hoses.
Illustration 12 g06117681
Inspect the engine oil hoses.Fuel Hoses
Illustration 13 g06117684
Inspect the fuel hoses.