KIT-TRANSMISSION BEARING 3505433 - Caterpillar

Illustration 1 g00546365
RELIEF VALVE GRAPHICSystem OperationReference: Refer to Troubleshooting, "All Wheel Drive Control Valve".Expected Result:The hose assembly and the pressure gauge have been installed on the forward pressure port.Results:
Continue - Proceed to test step 3.Test Step 3.
Start the engine and run the engine at high idle. Depress the transmission modulator pedal and shift the transmission direction and speed control to first speed forward. Move the torque control lever to the MAXIMUM position. You must be on hard pavement.
Release the transmission modulator pedal. The pressure gauge should read 35000 700 kPa (5100 100 psi). Record the pressure. Stop the machine and shut off the engine.
Loosen locknut (3) on relief valve (5). Turn set screw (3) counterclockwise. One turn of set screw (3) will change the pressure approximately 3700 kPa (537 psi).
Repeat Step 1 and Step 2. The pressure gauge reading should be approximately 3700 kPa (537 psi) lower than the original reading.SpecificationsReference: Refer to Troubleshooting, "All Wheel Drive Control Valve".System OperationReference: Refer to Troubleshooting, "All Wheel Drive Control Valve".Photo
Illustration 2 g00546365
RELIEF VALVE GRAPHICExpected Result:The second pressure gauge reading is approximately 3700 kPa (537 psi) lower than the original reading. Results:
Yes - Continue troubleshooting the all wheel drive system. Stop.
No - Proceed to test step 4.Test Step 4.
Replace the relief valve. Use new Caterpillar parts for replacement.How...Reference: Refer to Troubleshooting, "All Wheel Drive Control Valve".SpecificationsReference: Refer to Troubleshooting, "All Wheel Drive Control Valve".PartsReference: Refer to Troubleshooting, "6E-3907 VALVE GP PIN 5AK1-UP. PART OF 6E-3906 VALVE GP-CONTROL".Expected Result:The relief valve has been replaced.Results:
Repair Complete - Stop.