KIT-HYD CYLINDER SEAL 3573773 - Caterpillar

Customer specified parameters allow the vehicle owner to influence the operating technique of a driver. Some parameters may affect engine operation in a way that would not be expected by an inadequately trained driver. These parameters may lead to power or performance complaints even though the engine's performance is within the engine performance specification.Customer parameters may be changed repeatedly as a customer's operation changes or as new drivers are assigned to a truck. Customer passwords may be required to change these parameters.The following information is a brief description of the customer specified parameters. The following parameter values are included with the descriptions:
Minimum
Maximum
DefaultThe tables show values in an approximate range for metric units that is followed by the metric conversion to English units. The exact range of the parameter in metric units depends on the service tool that is being used. Each tool may use slightly different conversion factors.Customer Parameter Lockout
The customer parameter lockout is available in order to restrict access to changing some of the available parameters. Locking out a parameter requires customer passwords (if used). Once a parameter is locked out, factory passwords are required to change the parameter. Also, once a parameter is locked out, factory passwords are required to unlock the parameter.If a lockable parameter is not locked out, factory passwords are not required. A locked out parameter restricts the parameter from being changed directly by the customer. This helps vehicle owners that are encountering problems with operators that are obtaining customer passwords and altering some of these parameters.A locked out parameter also provides an audit trail. The audit trail can be used to determine the following information:
Time of change
Operator during changeThe following customer parameters are available for lockout:
"A/C Pressure Switch Fan-On Time"
"Battery Monitor and Engine Control Voltage "
"Battery Monitor and Low Idle Engine Speed"
"High Cruise Control Speed Set Limit"
"High Speed Range Axle Ratio"
"Low Speed Range Axle Ratio"
"Max PTO Vehicle Speed"
"Soft Vehicle Speed Limit"
"Top Engine Limit"
"Transmission Style"
"Two Speed Axle Switch"
"Vehicle ID"
"Vehicle Speed Cal (J1939-ABS)"
"Vehicle Speed Cal (J1939-Trans)"
"Vehicle Speed+ Calibration"
"Vehicle Speed Limit"
"VSL Protection"When an attempt to change a locked out parameter occurs, the "Factory Password" screen will come up. If changing the parameter is required, follow the instructions on the service tool display.Factory passwords are also required to change a parameter from a locked parameter to an unlocked parameter. If more than one parameter is locked out, and each one needs to be unlocked, one factory password is required.