KIT-GASKET 3604173 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 3E-3882 Eyebolt 1
C 189-0408 Shackle As 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01372027
Use Tooling (B), Tooling (C), and a suitable lifting device in order to position radiator (15). The weight of radiator (15) is approximately 45 kg (100 lb).
Illustration 2 g01372069
Install mount assemblies (17) and bolts (16).
Illustration 3 g01372019
Connect hose (14).
Illustration 4 g01372179
Use Tooling (A) and a suitable lifting device in order to install bracket assembly (12). The weight of bracket assembly (12) is approximately 39 kg (85 lb). Install bolts (13).
Illustration 5 g01372011
Install bolts (11).
Illustration 6 g01372009
Install tubes (10).
Illustration 7 g01372096
Install mount assembly (8) and bracket (9). Install bolt (7). Install bolts (6).
Illustration 8 g01372170
Install bracket (5). Install bolts (4). Install bolts (3).
Illustration 9 g01371906
Connect harness assembly (2). Connect tube assembly (1).
Fill the engine coolant. Refer to Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change". End By:
Install the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure (Hood) - Install".
Install the hydraulic oil cooler. Refer to Disassembly and Assembly, "Hydraulic Oil Cooler - Remove and Install".