3694712 KIT-SEAL Caterpillar parts
CB-44B, CB-54B, CD-54B, CP-533E, CP-54B, CS-533E, CS-54, CS-54B, CS-64B
Rating:
Alternative (cross code) number:
CA3694712
369-4712
3694712
CA3694712
369-4712
3694712
Weight: 0.79 pounds 0 kg.
VIBRATORY COMPACTOR,
This part in 2 request:
Show.
This information for suppliers only!
2024-08-20
2020-07-15
Compatible equipment models: 3694712:
Information:
Installation Procedure
Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
Illustration 1 g00805746Note: Make sure that the ports of the valve are in the correct position.
Position pilot valve (18) and install bolts (17).
Illustration 2 g00805743
Install bellows (16) on the pilot valve.
Illustration 3 g00805740
Position travel pedals (13) and (14) on the pilot valve. Install bolts (15). Tighten bolts (15) to a torque of 33 3 N m (25 3 lb ft).
Illustration 4 g00805736
Install rubber covers (12) and (11) onto the travel pedals.
Illustration 5 g00805734
Position rubber floormat (10) around the travel pedals.
Illustration 6 g00805726Note: Hydraulic fitting (9) is the hydraulic fitting with the filter.
Install hydraulic fitting (9) and (8) into the pilot valve.
Illustration 7 g00805699
Connect hose assemblies (3), (4), (5), (7), and (6).
Check the hydraulic system oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" and Operation and Maintenance Manual, "Lubricant Viscosities".
Start the engine, and check the operation of the pilot valve. Also, check for leaks. Stop the engine.
Illustration 8 g00854404
Position cover (1) and install bolts (2).
Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
Illustration 1 g00805746Note: Make sure that the ports of the valve are in the correct position.
Position pilot valve (18) and install bolts (17).
Illustration 2 g00805743
Install bellows (16) on the pilot valve.
Illustration 3 g00805740
Position travel pedals (13) and (14) on the pilot valve. Install bolts (15). Tighten bolts (15) to a torque of 33 3 N m (25 3 lb ft).
Illustration 4 g00805736
Install rubber covers (12) and (11) onto the travel pedals.
Illustration 5 g00805734
Position rubber floormat (10) around the travel pedals.
Illustration 6 g00805726Note: Hydraulic fitting (9) is the hydraulic fitting with the filter.
Install hydraulic fitting (9) and (8) into the pilot valve.
Illustration 7 g00805699
Connect hose assemblies (3), (4), (5), (7), and (6).
Check the hydraulic system oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" and Operation and Maintenance Manual, "Lubricant Viscosities".
Start the engine, and check the operation of the pilot valve. Also, check for leaks. Stop the engine.
Illustration 8 g00854404
Position cover (1) and install bolts (2).
Cat SIS web machinery list:
Parts kit Caterpillar catalog:
3132597
KIT-ROTARY
CB-44B, CB-54B, CD-54B, CP-533E, CS-533E, CS-54
CB-44B, CB-54B, CD-54B, CP-533E, CS-533E, CS-54
2556669
KIT-ROTARY
CS-533E
CS-533E
2600769
KIT-OVERHAUL
CP-533E, CS-533E, CS-54
CP-533E, CS-533E, CS-54
3144014
KIT-RELIEF VALVE
CP-533E, CS-533E, CS-54
CP-533E, CS-533E, CS-54
3133392
KIT-VALVE
CP-533E, CS-533E, CS-54
CP-533E, CS-533E, CS-54
2556876
KIT-RELIEF VALVE
CS-533E
CS-533E
2470010
KIT-SPRING
CB-214E, CB-334E
CB-214E, CB-334E
2470014
KIT-SEAL
CB-214E, CB-334E
CB-214E, CB-334E
2470011
KIT-REPAIR
CB-214E, CB-334E
CB-214E, CB-334E
2470012
KIT
CB-214E
CB-214E
2470013
KIT-BOOT
CB-214E, CB-334E
CB-214E, CB-334E
2744917
KIT-FOAM
CB-214E
CB-214E