KIT-CUTTER BIT 3720232 - Caterpillar

3720232 KIT-CUTTER BIT Caterpillar parts A26B, A7B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3720232
372-0232
3720232

Weight: 44 pounds 19 kg.

Buy KIT-CUTTER BIT 3720232 Caterpillar genuine, new aftermarket tractor parts with delivery
AUGER,

This part in 1 request: Show. This information for suppliers only!

#821572 3720232

2022-03-05

Compatible equipment models: 3720232:

AUGER A26B A7B Caterpillar

Number on catalog scheme:

Caterpillar 3720232 Parts scheme KIT-CUTTER BIT

For full view, you need register

Information:

Illustration 1 g00101709
Improper lifting and improper tie-downs can allow the load to shift and cause injury or damage.
The weight and the instructions that are given herein describe the machine as the machine is manufactured by Caterpillar.Refer to the Operation and Maintenance Manual, "Specifications" for specific weight information.
Use proper rated cables and slings for lifting. The crane should be positioned so that the machine is lifted parallel to the ground.
To prevent contact with the machine, lifting cables should have sufficient length.
Use the rear eyes and the front eyes that are provided on the lower frame to fasten tie-downs. Use corner protectors for sharp corners.
Move the hydraulic lockout control to the LOCKED position.Lifting the Machine Segments
Bucket
Illustration 2 g00115251
(1) Pin. (2) Sleeve. (3) Bolts. (4) Nuts.Install pin (1) and install sleeve (2) in the brackets of the bucket. The previous illustration indicates the method to secure pin (1) with bolts (3) and nuts (4). Fasten two proper rated wire cables to pin (1) .