KIT-CUTTER BIT 3720234 - Caterpillar

Illustration 1 g00675380
Early type
Illustration 2 g01043346
Later type
Deactivation of the hydraulic controls does not prevent the blade, boom swing, or auxiliary circuit functions from moving under gravity or other external forces. Gravity or other external forces can move the blade, boom swing, or auxiliary circuit functions suddenly if a hydraulic control lever is moved.Personal injury or death may occur from sudden machine movement.
DEACTIVATED - Pull the left and/or the right hydraulic lockout control upward to the RAISED position in order to deactivate the hydraulic controls.Note: A machine that is equipped with an enclosed cab will have only one pivoting console for the hydraulic lockout control. A machine that is equipped with a canopy will have two pivoting consoles for the hydraulic lockout control.Make sure that the left and/or the right hydraulic lockout control is in the RAISED position before you exit the machine.
Be sure to put the left and/or right hydraulic lockout control in the RAISED position when starting the engine. The engine start switch will not function if both of the consoles are in the LOWERED position.
Illustration 3 g00493520
Early type
Illustration 4 g01043347
Later typeACTIVATED - Push left and/or right hydraulic lockout control downward to the LOWERED position. When left and/or right consoles are in the LOWERED position the hydraulic controls are operable.