KIT-SEAL 3723373 - Caterpillar

(5ZL, 7TJ),
5130B (4CS),
5230 (7LL) Excavators;
784B (5RK) Tractor;
785B (6HK),
789B (7EK),
793B (1HL),
793C (4AR) Trucks;
992G (7HR),
994 (9YF) Wheel LoadersSUPPLEMENT: JUNE 1, 1998Service Magazine SEPD0406, Article 17, Page 12, March 2, 1998; "Uploading VIMS Source And Configuration Software ".Disregard the article listed above and refer to Service Magazine SEPD0419, Article 20, Page 23 with the same title.
--------------- END SUPPLEMENT ---------------Reference: Service Magazine; January 19, 1998; Page 30; "Machine Flash Software Ordered Through The Parts distribution System Now Available Through Corporate Mail Box".Reference: Software Document, JERD2136, "VIMS Users Procedures Manual"Reference: Service Manual Module, SENR6059, "Vital Information Management System (VIMS)"VIMS-PC is not configured to upload Source software from one diskette and Configuration software from another. Whenever possible, transfer both files to the VIMSDATA directory on the Service tools (computer) hard drive and upload from there.
When diskettes are required, VIMS source and configuration software must be uploaded to the on-board system from a single diskette on the "A:" drive. Perform the following procedure to copy both files onto a single diskette:
1. Copy the configuration file from the diskette to the PC's hard drive. 2. Copy the configuration file from the PC's hard drive onto the other diskette that contains the source file.3. Perform the upload of the source and configuration as usual with the "A:"drive designated as the default file location for the upload. Refer to the VIMS Service Manual Module or the VIMS Users Procedures Manual, for detailed instruction on how to upload the VIMS source and configuration software.