KIT- 3780135 - Caterpillar

for that specific MMU cabinet.
Start the UPSView 2.7 software and establish communications.
Select "Enter Password"
Type in the appropriate user name and password.
Click OK.
Perform an ALT <Z> and write down all the OperatingParameters that re not default parameters.
Click on the UPS Settings Menu and select "UpdateUPS Firmware."
If you are updating a Single Module System (SMS),go to Step 20.
For a Multiple Module System (MMS), select thefirmware file "PCC FPGA Firmware" from the pull down menu.
Note: The "PCC FPGA Firmware" filemay also be indicated as "Serial Flash PCC FPGA" if you have a versionof firmware older than 2.4.
Click on the "Browse " button.
Locate the appropriate firmware file