3812334 KIT-HYD CYLINDER SEAL Caterpillar parts
950H, 962H
Rating:
Alternative (cross code) number:
CA3812334
381-2334
3812334
CA3812334
381-2334
3812334
Weight: 0.80 pounds 0 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
3812334 KIT Seal-HYD (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.99 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.99 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
3812334 KIT Seal-HYD (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.99 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.99 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
For full view, you need register
Information:
Type 1
When the solenoid is installed, make an adjustment of the pinion clearance. The adjustment can be made with the starting motor removed.
Illustration 1 g01429959
Connection for checking pinion clearance
Typical example
(1) Connector to the motor
(2) Switch terminal
(3) Ground terminal
Install the solenoid without connector (1) from the MOTOR connections (terminal) on the solenoid to the motor.
Connect a battery, that has the same voltage as the solenoid, to the "SW" terminal (2).
Connect the other side of the battery to ground terminal (3).
Temporarily, connect a wire from the solenoid connection (terminal), which is marked "MOTOR", to the ground connection (terminal). The pinion will shift to the crank position and the pinion will stay there until the battery is disconnected.
Illustration 2 g01429960
Typical example
(4) Shaft nut
(5) Pinion
(A) Pinion clearance
Push the pinion toward the end with the commutator in order to remove free movement.
Pinion clearance (A) must be 9.10 mm (0.358 inch).
In order to adjust the pinion clearance, remove the plug and turn the shaft nut (4).
After the adjustment is completed, install the plug over the nut (4) and install the connector (1) between the MOTOR terminal on the solenoid and the motor starter. Type 2
The solenoid position on the starting motor controls the pinion clearance. If the solenoid position is correct, the pinion clearance is correct. Do the following procedure to adjust the solenoid position.
Illustration 3 g01429964
Solenoid Assembly
Typical example
(6) Intermediate housing
(7) Solenoid mounting bracket
(8) Bolts
(B) Distance for adjustment
Check the distance (B) between the intermediate housing (6) and the solenoid mounting bracket (7). Use calipers to check distance (B). (B) Distance ... 62.05 0.35 mm (2.443 0.014 inch)
If the distance (B) is not correct, loosen bolts (8) and move the solenoid until distance (B) is correct. The solenoid mounting bracket (7) has elongated holes.
Tighten the bolts (8) to 12 3 N m (9 2 lb ft) after the adjustment is correct.
When the solenoid is installed, make an adjustment of the pinion clearance. The adjustment can be made with the starting motor removed.
Illustration 1 g01429959
Connection for checking pinion clearance
Typical example
(1) Connector to the motor
(2) Switch terminal
(3) Ground terminal
Install the solenoid without connector (1) from the MOTOR connections (terminal) on the solenoid to the motor.
Connect a battery, that has the same voltage as the solenoid, to the "SW" terminal (2).
Connect the other side of the battery to ground terminal (3).
Temporarily, connect a wire from the solenoid connection (terminal), which is marked "MOTOR", to the ground connection (terminal). The pinion will shift to the crank position and the pinion will stay there until the battery is disconnected.
Illustration 2 g01429960
Typical example
(4) Shaft nut
(5) Pinion
(A) Pinion clearance
Push the pinion toward the end with the commutator in order to remove free movement.
Pinion clearance (A) must be 9.10 mm (0.358 inch).
In order to adjust the pinion clearance, remove the plug and turn the shaft nut (4).
After the adjustment is completed, install the plug over the nut (4) and install the connector (1) between the MOTOR terminal on the solenoid and the motor starter. Type 2
The solenoid position on the starting motor controls the pinion clearance. If the solenoid position is correct, the pinion clearance is correct. Do the following procedure to adjust the solenoid position.
Illustration 3 g01429964
Solenoid Assembly
Typical example
(6) Intermediate housing
(7) Solenoid mounting bracket
(8) Bolts
(B) Distance for adjustment
Check the distance (B) between the intermediate housing (6) and the solenoid mounting bracket (7). Use calipers to check distance (B). (B) Distance ... 62.05 0.35 mm (2.443 0.014 inch)
If the distance (B) is not correct, loosen bolts (8) and move the solenoid until distance (B) is correct. The solenoid mounting bracket (7) has elongated holes.
Tighten the bolts (8) to 12 3 N m (9 2 lb ft) after the adjustment is correct.
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
120K, 120K 2, 12K, 140K, 140K 2, 160K, 950H, 962H, IT62H
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 24H, 30/30, 3114,...
120G, 120H, 120H ES, 120H NA, 12G, 12H ES, 12H NA, 130G, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 3114, 3116, 3126, 3126B, 317...
120G, 120H, 120H ES, 120H NA, 12G, 12H ES, 12H NA, 130G, 135H NA, 140G, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 3114, 3116, 3126B, 3176B, 3176C, 3196, 3...
120G, 120H, 120H ES, 120H NA, 12G, 12H ES, 12H NA, 130G, 135H NA, 140G, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 3114, 3116, 3126B, 3176B, 3176C, 3196, 3...
120G, 120M, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 160M, 163H, 163H NA, 1673C, 16G, 16H, 16H NA, 16M, 215B,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
1090, 1190, 1190T, 1290T, 12G, 1390, 140G, 322B L, 325B, 345B II, 350, 3508B, 3512, 3512B, 3512C, 3516B, 3516C, 375, 426C, 436C, 438C, 438D, 442D, 511, 515, 521, 522, 525, 525B, 532, 539, 541, 550, 55...
3126E, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336...
120M, 12M, 140M, 14M, 160M, 16M, 24M, 583T, 587R, 587T, 725, 730, 797, 797B, 928H, 938H, 950H, 962H, 966H, 972H, 994F, CB-44B, CB-54B, D10T, D11T, IT28G, IT38H, IT62H
120K, 120M, 12K, 12M, 12M 3, 12M 3 AWD, 140K, 140M, 140M 3, 140M 3 AWD, 160M, 160M 3, 160M 3 AWD, 950H, 950K, 962H, 962K, IT62H
966H, 972H
966H, 966K
950H, 950K, 962H, 962K, 966H, 966K, 966M, 972H, 972K, 972M
3477417
KIT-CONNECTOR
950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, 980H
950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, 980H
2271069
KIT-SPRING
834H, 988G, 988H
834H, 988G, 988H
2040156
KIT-SEAL
988G
988G
320C, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320E, 323D L, 323D2 L, 324D, 324D L, 325D, 326D L, 329D, 329D L, 329E L, 329E LN, 330D, 330D L, 336D, 336D2, 336E L, 340D L, 340D2 L, 365B II, 36...
2412924
KIT-SEAL
844H, 990H, D10N, D10R, D10T, D11R, D11T
844H, 990H, D10N, D10R, D10T, D11R, D11T
4161224
KIT-HYD CYLINDER SEAL
990H, 990K
990H, 990K
3785756
KIT-PUMP REPAIR
854K, 988H, 988K, 990H, 990K, 992G, 992K, 993K
854K, 988H, 988K, 990H, 990K, 992G, 992K, 993K
1381240
KIT-ADAPTER
24M, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 777D, 777F, 777G, 785C, 785D, 789C, 789D, 793C, 793D, 797F, 844H, 854K, 990H, 992K, 993K, 994F, 994H, D11N, D11R
24M, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 777D, 777F, 777G, 785C, 785D, 789C, 789D, 793C, 793D, 797F, 844H, 854K, 990H, 992K, 993K, 994F, 994H, D11N, D11R
