KIT-TORQUE CONVERTER GASKET 3838202 - Caterpillar

Introduction
The Special Instruction, GEHS0361 is for the installation of the 348-1376 Front Lines Gp "Revision level -01". If you need more information about the installation of the Medium Pressure Wiring on your machine, consult your Cat dealer.Do not perform any procedure that is outlined in this publication without reading this article first.Safety Section
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Personal injury or death can result from sudden work tool movement.Sudden movement of the work tool can cause injury to persons near the work tool.To prevent injury or death, make sure that the area around the work tool is clear of personnel and obstructions before operating the work tool.
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
Parts List for 348-1376 Front Lines Gp Revision -01    
Item    Qty    Pt. No.    Part Name    
(1)     1     270-5672     Solenoid and Relief Valve Gp    
(2)     1     270-5757     Solenoid and Relief Valve Gp    
(3)     2     352-7063     Cap    
(4)     1     148-8327     Connector As    
(5)     4     8T-4223     Hard Washer    
(6)     4     8T-4956     Bolt    
Illustration 2 g03000957
348-1376 Front Lines Gp Installation Procedure
Illustration 3 g03000976
(1) 270-5672 Solenoid and Relief Valve Gp (2) 270-5757 Solenoid and Relief Valve Gp (3) 352-7063 Cap (4) 148-8327 Connector As (5) 8T-4223 Hard Washer (6) 8T-4956 Bolt
Install valves (1) and (2) onto the supports for the front lines group.
Illustration 4 g03001981
(1) 270-5672 Solenoid and Relief Valve Gp (2) 270-5757 Solenoid and Relief Valve Gp (3) 352-7063 Cap (4) 148-8327 Connector As (5) 8T-4223 Hard Washer (6) 8T-4956 Bolt
Attach hoses from the front lines group to valves (1), and (2) .
Unless otherwise specified, tighten all hardware and fittings to standard torque. ReferenceTorque Specifications, SENR3130, " Torque Specifications"