KIT-TRANSMISSION GASKET 3838208 - Caterpillar

CEM Assembly Removal Procedure
Start By:
Remove the DPF. Refer to Disassembly and Assembly, "Diesel Particulate Filter - Remove " for the correct procedure.
Illustration 1 g03013176
Typical example
Make a temporary Mark on all components on the support assembly (1) and all bolts, in order to aide alignment during installation.
Illustration 2 g03015096
Typical example
Remove bolts (2) from bracket (3).
Remove bolts (4) from bracket (3).
Remove bolts (7) from bracket (3) and remove bracket (3) from the engine. The weight of bracket (3) is approximately 10 kg (22 lb).
If necessary, remove bolts (9) (not shown) and remove bracket (8) from the engine.
If necessary, remove bolts (6) and remove bracket (5) from the engine. CEM Assembly Installation Procedure
Illustration 3 g03013176
Illustration 4 g03015096
If necessary, using temporary Marks position bracket (8) and install bolts (9) (not shown). Tighten bolts (9) hand tight.
If necessary, using temporary Marks position bracket (5) and install bolts (6). Tighten bolts (6) hand tight.
Position bracket (3) and loosely install bolts (4) loosely install bolts (2), and loosely install bolts (7).
Using temporary Marks, align support assembly (1) and tighten bolts.
Tighten bolts (9) to a torque of 25 N m (221 lb in)
Tighten bolts (6) to a torque of 25 N m (221 lb in)
Tighten bolts (2) to a torque of 45 N m (33 lb ft)
Tighten bolts (4) to a torque of 25 N m (221 lb in)
Tighten bolts (7) to a torque of 25 N m (221 lb in) End By:
Install the DPF. Refer to Disassembly and Assembly, "Diesel Particulate Filter - Install " for the correct procedure.