KIT-TRANSMISSION GASKET 3838927 - Caterpillar

Which Generate This Code:The Engine Control Module (ECM) detects the following condition:
Vehicle speed exceeds the programmable "Vehicle Overspeed Threshold" for one second. System Response:The ECM will not energize the injector solenoids while the diagnostic code is active. "Vehicle Speed Limit" will be displayed on the status screen.Customer passwords are required to clear this code.Injection is disabled until the vehicle speed falls below the programmed "Vehicle Overspeed".This diagnostic code does not necessarily indicate that there is an electronic problem. If the vehicle speed calibration is wrong, perform the following procedure:Test Step 1. Perform the following diagnostic procedure: Vehicle Speed Circuit - CalibrateResults:
OK - STOP