KIT-CAB DOOR & MOUNTING 3888276 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Several different air starting motors are available for use. The starting motors can have different configurations for the air tube assemblies. Examples of installing two different air starting motors are provided below.Installation of an Air Starting Motor Without the Air Tube Assemblies Attached
Illustration 1 g00597643
Attach a suitable lifting device to air starting motor (6). The weight of air starting motor (6) is approximately 48 kg (106 lb).
Install a new gasket for the joint between the cover of air starting motor (6) and the flywheel housing. Position air starting motor (6). Install bolts (7).
Connect hose assembly (5).
Illustration 2 g00597642
Install tube assemblies (4) and U-bolt (3).
Install bolts (2).
Connect hose assemblies (1). Installation of an Air Starting Motor With the Air Tube Assemblies Attached
Illustration 3 g00615940
Attach a suitable lifting device to air starting motor (4). The weight of air starting motor (4) with the air tube assemblies is approximately 86 kg (190 lb).
Install a new gasket for the joint between the cover of air starting motor (4) and the flywheel housing. Position air starting motor (4). Install bolts (3).
Illustration 4 g00615939
Connect the tube assemblies to elbow (2).
Connect harness assembly (1).