KIT-FILTER-DIESEL PTCLT 3900645 - Caterpillar

Introduction
This manual will allow dealers and customers to benefit from reductions in cost that are made possible through an established testing and inspection program. The most current and pertinent information that is known to Caterpillar is included in this manual. Since Caterpillar makes improvements to products, this manual must be used with the latest service information that is available from Caterpillar.For questions or additional information, contact the Caterpillar Service Support Department at (309) 675-8970.Summary
The specifications that are given in this manual will help determine if a machine is operating at maximum hydraulic efficiency. If the inspected machine does not meet the required specifications, the faulty component within the hydraulic system must be adjusted or rebuilt. For additional information on an individual component, refer to the appropriate Service Manual.References
Table 1
Custom Hydraulic Service Literature
Media Number Description
SEBF8292 300A and 300B Series Excavator Inspection
SEBF8778 365B, 385B, and 5090B Series Excavator Inspection Instructions
The following instructions will aid in the use of the specifications in this manual:
This manual contains Excavator specifications. Specifications are added to this manual upon completion.
All specifications in this manual are taken from current Testing and Adjusting manuals for each machine.
Engine specifications for the tables of this manual are the responsibility of the dealer. Because of the numerous engine arrangements and possible modifications, the Engine specifications will not be listed.
When possible, all of the factory specifications are listed in the appropriate columns. If the factory specifications are not available, "N/A" will be listed.
The "Customer" column on the tables should be used to record the specifications that relate to modifications after production. This column can be used to record a baseline of information on new equipment after predelivery inspection and delivery.
The "Reference" column on the tables should be used as a reference to determine the test that was used to reach the specification.
The pages that contain the information in this manual can be copied in order to create a specific, dedicated list of specifications for each customer. The list should be kept with other information for the maintenance log of the machine.
Some of the "Cycle Times" for the 200 Excavators are different from the inspection procedures. In these cases, the specifications will be given in the "Reference" column of the tables.