KIT-OBJECT DETECTION 3936269 - Caterpillar

To prevent possible personal injury, do not remove any hoses from the air dryer until all air pressure has been removed.
The air dryer is located behind the left front suspension cylinder on the outside of the frame assembly. 1. Disconnect three hose assemblies (1), (2) and (7) from air dryer (3).2. Disconnect switch (6). Do not remove clamps (5) during the removal procedure.3. Remove four bolts (3) and the washers that hold air dryer (3) to the frame assembly. Remove air dryer (3) with clamps (5) still attached, from the frame assembly.4. For disassembly and assembly of the air dryer, see "Air Dryer For Vehicle Air Systems" module, SENR7474. The following steps are for the installation of the air dryer. 5. Put air dryer, with clamps (5) attached in position on the frame assembly. Install four bolts (4) and the washers.6. Connect three hose assemblies (1), (2) and (7) to air dryer (3).7. Connect switch (6).8. Start the machine to recharge the air reservoirs.