KIT-SEAL 3951273 - Caterpillar

Emergency Stop Procedure
To emergency stop perform the following steps below:
Emergency shutoff controls are for EMERGENCY use ONLY. DO NOT use emergency shutoff devices or controls for normal stopping procedure.
Do not start the engine until the problem necessitating the emergency stop has been located and corrected.
Illustration 1 g06129863
(1) Emergency Button
(2) Battery Isolation Switch
Push the emergency button (1).
Turn the battery isolation switch (2) to lock out the unit. Ensure that the engine has stopped.
Rotate the emergency stop button clockwise to return it to normal function.
Ensure that any components for the external system that support the engine operation are secured after the engine is stopped.Emergency Stop Reset
Note: After activating the emergency stop, the button must be returned to the normal running position. Neglecting this procedure may cause the fuel stop solenoid to foul.Failure to follow this procedure may void the warranty.
Illustration 2 g06129844
The engine will not start when the emergency stop button (1) is locked.
Turn the button clockwise in order to reset.
For routine stopping, use the standard designed system.
Illustration 3 g06129867
For safety reasons, when the engine has stopped, always turn the battery isolation switch (2). This will prevent the engine from restarting and will also prevent electrical damage and injury that may result.
During maintenance of the engine, isolate the battery power before working on the machine. Do not operate the emergency stop.