KIT-BUSHING 3E7860 - Caterpillar

Conditions Which Generate This Code:The Electronic Control Module (ECM) detects an open circuit on the emergency stop input to the ECM.System Response:The ECM disables the injection signals to the injector solenoids.Possible Performance Effect:The engine will shut down.Test Step 1. Verify the Cause of the Emergency Stop Shutdown
Talk to the operator and determine the reason for the emergency stop shutdown.
Verify that the condition for the emergency stop shutdown has been resolved. Expected Result:The reason for the emergency stop shutdown has been determined. The reason for the emergency stop shutdown has been resolved.Results:
OK - The reason for the emergency stop shutdown has been determined. The reason for the emergency stop shutdown has been resolved.Repair: The emergency stop condition can be reset by performing the following steps:
Reset the emergency stop switch to the OFF position.
Cycle power to the ECM. If a "Diagnostic Reset" switch is installed, toggle the "Diagnostic Reset" switch in order to clear the emergency stop condition without shutting off power to the ECM. STOP