KIT-GASKET 3E8922 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     2P-8250     Strap Wrench     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00787187
Fuel filter base shown without fuel priming pump
Disconnect fuel lines (1) and (2). Plug and cap all openings in order to prevent debris and contamination from entering the fuel system.
Disconnect wiring harness connector (3) for the fuel pressure sensor.
Remove fuel filters (5) from fuel filter base (4) with Tool (A) .
Remove bolts (6) and fuel filter base (4) .
Remove the studs from the fuel filter base if the studs are damaged.