KIT-GASKET 4158642 - Caterpillar

Illustration 4 g01030033
Cross Axle Differential Lock Solenoid
The cross axle differential lock solenoid is an output of the ECM. The solenoid connects to the ECM at connector contact J1-66. The solenoid locks the axles together for maximum traction. After the operator's request, the ECM evaluates several parameters in order to determine if this action is safe. If the parameters are correct the ECM activates the solenoid.The solenoid has a connector with two contacts. The solenoid receives +battery power from the ECM through Contact 1. Contact 2 connects to ground through the ECM at J1-55.The ECM records diagnostic codes that occur with the cross axle differential lock solenoid. A diagnostic code with the cross axle differential lock solenoid is recorded as a CID 1100. Interaxle Lock Solenoid
Illustration 5 g01030033
Interaxle Lock Solenoid
The interaxle lock solenoid is an output of the ECM. The interaxle lock solenoid connects to the ECM at connector contact J1-65. The interaxle lock solenoid locks the axle together for maximum traction. After the operator's request, the ECM evaluates several parameters in order to determine if locking the axle is safe. If the parameters are correct the ECM activates the interaxle solenoid.The solenoids have a connector with two contacts. The solenoid receives +battery power from the ECM through Contact 1. Contact 2 connects to ground through the ECM at J1-55.The ECM records diagnostic codes that occur with the interaxle solenoid. A diagnostic code with the interaxle lock solenoid is recorded as a CID 0971. Raise and Lower Solenoid
(S/N: AGF; AXM; AWR; AFX; B1L; B1M; B1N; B1P; WWA; WWB; WWC; WWD)
Illustration 6 g00390454
Raise and Lower Solenoid
Illustration 7 g01056288
Raise and Lower Solenoid (For simplified hydraulic machines only)
(S/N: AFX1179-Up; AGF1092-Up)
The bed raise solenoid and the bed lower solenoid are outputs of the ECM. The bed raise solenoid connects to the ECM at connector contact J1-67. The lower solenoid connects to the ECM at connector contact J1-68. The bed raise solenoid and the bed lower solenoid controls the movement of the bed.After the operator's request, the ECM evaluates several conditions in order to determine the response of the outputs. See Systems Operation, "Hoist System Function" for additional information on the function of these outputs.The solenoids have a connector with two contacts. The solenoid receives +battery power from the ECM through Contact 1. Contact 2 connects to ground through the ECM at J1-54.The ECM records diagnostic codes that occur with the hoist solenoids. A diagnostic code with the bed raise solenoid is recorded as a CID 0724. A diagnostic code with the bed lower solenoid is recorded as a CID 0725. Eject Solenoid and Retract Solenoid
(S/N: AZZ; B1R; B1W)
Illustration 8 g00390454
Eject Solenoid and Return Solenoid
The Eject Solenoid and the return solenoid are outputs of the ECM. The Eject Solenoid connects to the ECM at connector contact J1-67. The return solenoid connects to the ECM at connector contact J1-68. The Eject Solenoid and the return solenoid controls the movement of the bed.After the operator's request, the ECM evaluates several conditions in order to determine the response of the outputs. See