KIT-COVER 4233255 - Caterpillar

Table 6
Warning and Instruction Film in Other Languages    
Language    Related Part Numbers    
Warning Film Instruction Film    
English     7I-0455     7I-1549     7I-0456    
French     7I-0459     7I-1550     7I-0460    
Spanish     7I-0461     7I-1551     7I-0462    
German     7I-0463     7I-1552     7I-0464    
Italian     7I-0465     7I-1553     7I-0466    
Portuguese     7I-0467     7I-1554     7I-0468    
Dutch     7I-0471     7I-1555     7I-0472    
Greek     7I-0473     7I-1556     7I-0474    
Danish     7I-0475     7I-1557     7I-0476    Machine Control Patterns
A machine control pattern is selected by repositioning the lever on top of the two-way pilot valve. See Illustration 4 and Step 20 in ""Installing the Two-Way Pilot Valve"" for correct changing procedures.Use the following icons to learn the corresponding machine movements in Illustration 7. Each machine control pattern has specific movements.
Stick Out (1) - Move the control lever to this position in order to move the stick outward.
Swing Right (2) - Move the control lever to this position in order to turn the upper structure to the right.
Stick In (3) - Move the control lever to this position in order to move the stick inward.
Swing Left (4) - Move the control lever to this position in order to turn the upper structure to the left.
Boom Lower (5) - Move the control lever to this position in order to lower the boom.
Bucket Dump (6) - Move the control lever to this position in order to dump the bucket.
Boom Raise (7) - Move the control lever to this position in order to raise the boom.
Bucket Close (8) - Move the control lever to this position in order to close the bucket. HOLD (9) will stop the movements of the stick, the boom, the bucket, and the upper structure.Two incorporated functions may be performed at the same time by moving the appropriate control lever diagonally.If the machine is equipped with a hydraulic hammer, the functions of positions (6) and (8) are distinct.Hydraulic Hammer Raise (6) allows you to raise the hydraulic hammer.Hydraulic Hammer Lower (8) allows you to lower the hydraulic hammer.The two machine control patterns are shown in Illustration 7.
Illustration 7 g00101291
The machine control patterns in the left and right columns correspond to the left and right control levers: (A) SAE machine control pattern and (B) standard backhoe (BHL).