KIT-SEAT 4245262 - Caterpillar

Illustration 1 g00559973The two-position rocker switch is located on the hydraulic control console to the right of the seat.
Maximum Rimpull - To provide maximum rimpull, move the switch to position (1). Maximum rimpull will be provided regardless of the setting of the rimpull selection switch.
Reduced Rimpull - To provide reduced rimpull, move the switch to position (2). The machine will return to the selected setting of the rimpull selection switch. This is only true if the transmission is in first speed. If the transmission is not in first speed, the machine will remain at maximum rimpull.
Illustration 2 g00500969Indicator light (3) will be illuminated when the control is providing reduced rimpull. The light will be off when the control is providing maximum rimpull.
Illustration 3 g00802845The switch panel is located on the left side of the operator compartment.Reduced rimpull selection switch (4) reduces the potential for wheel slippage without reducing the hydraulic efficiency. The reduced rimpull selection switch is a four-position switch. Each setting corresponds to a maximum allowable percentage of maximum rimpull.Note: The rimpull settings may be adjusted in order to meet operating conditions.Reference: To change the maximum allowable percentages for each setting of the rimpull selection switch, refer to Testing and Adjusting, RENR3095, "Power Train".
Illustration 4 g00997951Operating With Reduced Rimpull
To select a reduced rimpull setting, move the reduced rimpull selection switch to the desired setting and move the reduced or maximum rimpull switch to the REDUCED position.If the machine is in first speed, the reduced rimpull selection switch will provide an impeller clutch pressure which limits the rimpull to the desired level when the left brake pedal is fully released.Depressing the left brake pedal will further reduce rimpull from the selected percentage. The rimpull that is commanded by the fully released pedal will equal the reduced rimpull that is selected on the reduced rimpull selection switch.When a lower rimpull is selected, pedal travel will result in a more gradual decrease in rimpull.If the machine is not in first speed, the impeller clutch pressure will remain at the maximum level until the transmission is placed into first speed.The reduced rimpull selection switch will continue to limit rimpull until the transmission is shifted out of first speed or until the reduced or maximum rimpull switch is placed in the MAXIMUM position.